Compare Revisions

The credentials to download the source code are:
 Username: svnusers
 Password: svnusers

Ignore whitespace Rev 2747 → Rev 2748

/branches/AMB/AdapterFramework/etc/codec.properties
0,0 → 1,12
# Debug level - Authorized values: OFF, ALL, INFO, SEVERE
DEBUG_ENABLED = OFF
 
### External Codecs (encoding, class)
ASN.1Codecs = CAM,DENM,CDD,MAPEM_SPATEM,IVIM,EVSCN,SREM_SSEM
CAM = LibItsCam_asn1,org.etsi.its.tool.elvior.LibItsCam_asn1
DENM = LibItsDenm_asn1,org.etsi.its.tool.elvior.LibItsDenm_asn1
CDD = LibItsContainer_asn1,org.etsi.its.tool.elvior.LibItsContainer_asn1
MAPEM_SPATEM = LibItsMapemSpatem_asn1,org.etsi.its.tool.elvior.LibItsMapemSpatem_asn1
IVIM = LibItsIvim_asn1,org.etsi.its.tool.elvior.LibItsIvim_asn1
EVSCN = LibItsEvcsn_asn1,org.etsi.its.tool.elvior.LibItsEvcsn_asn1
SREM_SSEM = LibItsSremSsem_asn1,org.etsi.its.tool.elvior.LibItsSremSsem_asn1
/branches/AMB/AdapterFramework/etc/ta.properties
0,0 → 1,66
### Debug level
! Authorised values: OFF, ALL, INFO, SEVERE
DEBUG_ENABLED=OFF
 
### Port stacks and parameters
!
!! Port stack format (layers are separated by '/'):
! [componentName] + "." + [portName] + "_stack";
! or
! [componentName] + "_stack";
! or
! [portType] + "." + [portName] + "_stack";
! or
! [portType] + "_stack";
!
!
!! Port parameters format (parameters are separated by ';'):
! [portType] + "_params"
! and
! [portType] + "." + [portName] + "_params"
! and
! [componentName] + "_params"
! and
! [componentName] + "." + [portName] + "_params"
 
#CamPort_stack = BTP/GN/ETH
#DenmPort_stack = BTP/GN/ETH
#MapemSpatemPort_stack = BTP/GN/ETH
#IvimPort_stack = BTP/GN/ETH
#SremSsemPort_stack = BTP/GN/ETH
#BtpPort_stack = GN/ETH
GeoNetworkingPort_stack = GnSource/Debug
#Ipv6OverGeoNetworkingPort_stack = Debug
UpperTesterPort_stack = UtYes
 
### Other parameters
UpperTesterSettings = 192.168.56.129:1501
LocalEthernetMAC = 0008543CEF40
TsBeaconInterval = 1000
TsLatitude = 43551050
TsLongitude = 10298730
LinkLayer_MTC = 8BADF00D0100
LinkLayer_NodeA = 8BADF00D0101
LinkLayer_NodeB = 8BADF00D0102
LinkLayer_NodeC = 8BADF00D0103
LinkLayer_NodeD = 8BADF00D0104
LinkLayer_NodeE = 8BADF00D0105
LinkLayer_NodeF = 8BADF00D0106
 
### GN6 Specific parameters
Gn6RemoteAdapterIp = 172.17.15.38
Gn6RemoteAdapterPort = 42000
 
### Security Specific parameters
TsItsAidOther = 38
UtSecuredMode = false
TsSecuredRootPath = data/certificates
TsSecuredConfiId =
 
### GNSS Specific parameters
#GnssScenarioSupport = ${LibItsCommon_Pixits.PICS_GNSS_SCENARIO_SUPPORT}
#GnssControllerAddress = 10.73.224.145
#GnssScenario_StaticPos = C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\StaticPos\StaticPos.scn
#GnssScenario_DynamicPos200m = C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1000m\DynamicPos200m.scn
#GnssScenario_DynamicPos1000m = C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1000m\DynamicPos1000m.scn
#GnssScenario_DynamicPos1500m = C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1500m\DynamicPos1500m.scn
/branches/AMB/AdapterFramework/taconfig.xml
1,131 → 1,34
<?xml version="1.0" encoding="UTF-8"?>
<testadapter>
<extfunc>
<plugin id="org.etsi.ttcn.testsystem"/>
</extfunc>
<port>
<plugin id="org.etsi.ttcn.testsystem"/>
<parameter id="default" value="true"/>
</port>
<codec encode="">
<plugin id="org.etsi.ttcn.testsystem"/>
<parameter id="default" value="true"/>
</codec>
<!--
<codec encode="LibItsCam_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsCam_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibItsCam_asn1.LibItsCam_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsCam_asn1"/>
</codec>
<codec encode="LibItsDenm_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsDenm_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibItsDenm_asn1.LibItsDenm_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsDenm_asn1"/>
</codec>
<codec encode="LibItsCdd_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsCdd_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibItsCdd_asn1.LibItsCdd_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsCdd_asn1"/>
</codec>
<codec encode="LibItsMapemSpatem_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsMapemSpatem_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibItsMapemSpatem_asn1.LibItsMapemSpatem_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsMapemSpatem_asn1"/>
</codec>
<codec encode="LibItsIvim_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsIvim_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibItsIvim_asn1.LibItsIvim_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibItsIvim_asn1"/>
</codec>
<codec encode="LibItsSremSsem_asn1">
<plugin id="org.etsi.its.codec.tool.testingtech.LibIteSremSsem_asn1">
<parameter id="class" value="org.etsi.its.codec.tool.testingtech.LibIteSremSsem_asn1.LibIteSremSsem_asn1PERCanonicalUnalignedCodecProvider"/>
</plugin>
<plugin id="org.etsi.its.codec.tool.testingtech.LibIteSremSsem_asn1"/>
</codec>
<codec encode="">
<plugin id="com.testingtech.ttworkbench">
<parameter id="class" value="org.etsi.its.tool.testingtech.Its_CodecProvider"/>
</plugin>
<parameter id="default" value="true"/>
</codec>
<extfunc>
<plugin id="com.testingtech.ttworkbench">
<parameter id="class" value="org.etsi.its.tool.testingtech.ExternalFunctionsPluginProvider"/>
</plugin>
</extfunc>
<port>
<plugin id="com.testingtech.ttworkbench.sa">
<parameter id="class" value="org.etsi.its.tool.testingtech.PluginAdapter"/>
</plugin>
<parameter id="taParams">
<parameter id="DEBUG_ENABLED">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>ALL</Values:value>
</Values:charstring>
</value>
</parameter>
<parameter id="camPort" value="BTP/GN/ETH"/>
<parameter id="denmPort" value="BTP/GN/ETH"/>
<parameter id="mapemSpatemPort" value="BTP/GN/ETH"/>
<parameter id="ivimPort" value="BTP/GN/ETH"/>
<parameter id="sremSsemPort" value="BTP/GN/ETH"/>
<parameter id="btpPort" value="GN/ETH"/>
<parameter id="geoNetworkingPort" value="ETH"/>
<parameter id="ipv6OverGeoNetworkingPort" value="Debug"/>
<parameter id="UpperTesterSettings" value="172.17.15.38:12345"/>
<parameter id="OfflineMode" value="false"/> <!-- Post-mortem ATS execution mode -->
<parameter id="PcapFile" value="pcap/vendor/TC_CAM_MSD_FMT_BV_01.pcap"/>
<parameter id="OffsetTime" value="1421661427.233361"/> <!-- Start at time in milliseconds since 1970-01-01, e.g. 1421661427.233361 -->
<parameter id="LocalEthernetMAC" value="00E08F008855"/>
<parameter id="IutEthernetTypeValue" value="0x8947"/>
<parameter id="TsBeaconInterval" value="1000"/>
<parameter id="TsLatitude" value="43551050"/>
<parameter id="TsLongitude" value="10298730"/>
<parameter id="LinkLayer_MTC" value="8BADF00D0100"/>
<parameter id="LinkLayer_NodeA" value="8BADF00D0101"/>
<parameter id="LinkLayer_NodeB" value="8BADF00D0102"/>
<parameter id="LinkLayer_NodeC" value="8BADF00D0103"/>
<parameter id="LinkLayer_NodeD" value="8BADF00D0104"/>
<parameter id="LinkLayer_NodeE" value="8BADF00D0105"/>
<parameter id="LinkLayer_NodeF" value="8BADF00D0106"/>
<parameter id="Gn6RemoteAdapterIp" value="172.17.15.38"/>
<parameter id="Gn6RemoteAdapterPort" value="42000"/>
<parameter id="TsItsAidOther" value="38"/>
<parameter id="UtSecuredMode" value="false"/>
<parameter id="TsSecuredRootPath" value="data/certificates"/>
<parameter id="TsSecuredConfiId">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value/>
</Values:charstring>
</value>
</parameter>
<parameter id="GnssScenarioSupport" value="${LibItsCommon_Pixits.PICS_GNSS_SCENARIO_SUPPORT}"/>
<parameter id="GnssControllerAddress">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>10.73.224.145</Values:value>
</Values:charstring>
</value>
</parameter>
<parameter id="GnssScenario_StaticPos">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\StaticPos\StaticPos.scn</Values:value>
</Values:charstring>
</value>
</parameter>
<parameter id="GnssScenario_DynamicPos200m">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1000m\DynamicPos200m.scn</Values:value>
</Values:charstring>
</value>
</parameter>
<parameter id="GnssScenario_DynamicPos1000m">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1000m\DynamicPos1000m.scn</Values:value>
</Values:charstring>
</value>
</parameter>
<parameter id="GnssScenario_DynamicPos1500m">
<value>
<Values:charstring xmlns:Values="Values.xsd" type="charstring">
<Values:value>C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1500m\DynamicPos1500m.scn</Values:value>
</Values:charstring>
</value>
</parameter>
</parameter>
<parameter id="default" value="true"/>
</port>
-->
</testadapter>
/branches/AMB/AdapterFramework/tt3plugins/LibItsFntp_TypesAndValues/TT3plugin.xml
File deleted
/branches/AMB/AdapterFramework/tt3plugins/LibItsFntp_TypesAndValues
Property changes:
Deleted: tsvn:logminsize
## -1 +0,0 ##
-5
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsUpperTester/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsUpperTester/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsUpperTester/TT3plugin.xml (nonexistent)
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.its.uppertester" name="ETSI Its Upper Tester" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiItsUpperTester.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiItsUpperTester
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsUpperTester (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsUpperTester (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsUpperTester
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiItsUpperTester.jar
Index: AdapterFramework/tt3plugins/TT_TestSystem_SA/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/TT_TestSystem_SA/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/TT_TestSystem_SA/TT3plugin.xml (nonexistent)
@@ -1,263 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="com.testingtech.ttworkbench.sa" name="Testing Technologies TTworkbench Integration System Adapter" provider-name="Testing Technologies IST GmbH" version="1.0.0.0">
- <runtime>
- <library name="TT_TestSystem.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- </dependency>
- <extension point="com.testingtech.ttcn.tri.extension.PortPluginProvider">
- <parameter id="class" value="org.etsi.its.tool.testingtech.PluginAdapter"/>
- <parameter id="taParams">
- <parameter id="taParamDeclaration">
- <parameter id="name" value="DEBUG_ENABLED"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="ALL"/>
- <parameter id="description" value="Set to ALL/INFO/OFF to activate full/medium/no traces"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="camPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="CamSource"/>
- <parameter id="description" value="Define the port/layer configuration for CAM"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="denmPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="DenmSource"/>
- <parameter id="description" value="Define the port/layer configuration for DENM"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="mapemSpatemPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="MapemSpatemSource"/>
- <parameter id="description" value="Define the port/layer configuration for MAPEM-SPATEM"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="ivimPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="IvimSource"/>
- <parameter id="description" value="Define the port/layer configuration for IVIM"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="sremSsemPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="SremSsemSource"/>
- <parameter id="description" value="Define the port/layer configuration for SREM-SSEM"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="btpPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BtpSource"/>
- <parameter id="description" value="Define the port/layer configuration for BTP"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="geoNetworkingPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="GnSource"/>
- <parameter id="description" value="Define the port/layer configuration for GeoNetworking"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="ipv6OverGeoNetworkingPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="Gn6Source"/>
- <parameter id="description" value="Define the port/layer configuration for GeoNetworking over IPv6"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="v2gPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="Debug"/>
- <parameter id="description" value="Define the port/layer configuration for V2G"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="UpperTesterSettings"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="192.168.56.11:2222"/>
- <parameter id="description" value="Define the Upper Tester settings for communication with Upper Tester"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="OfflineMode"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="false"/>
- <parameter id="description" value="Post-mortem ATS execution mode"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="PcapFile"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value=""/>
- <parameter id="description" value="PCAP file location, e.g. pcap/vendor/uc1.pcap"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="OffsetTime"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="0"/>
- <parameter id="description" value="Start at time in seconds since 1970-01-01, e.g. 1421661427.233361"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LocalEthernetMAC"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="0025645B0CED"/>
- <parameter id="description" value="Define the MAC address of the Ethernet interface connected to the IUT device"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="IutEthernetTypeValue"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="0x8947"/>
- <parameter id="description" value="Define the Ethernet type value used by the IUT"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeA"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0001"/>
- <parameter id="description" value="Link-Layer address of component NodeA"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeB"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0002"/>
- <parameter id="description" value="Link-Layer address of component NodeB"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeC"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0003"/>
- <parameter id="description" value="Link-Layer address of component NodeC"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeD"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0004"/>
- <parameter id="description" value="Link-Layer address of component NodeD"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeE"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0005"/>
- <parameter id="description" value="Link-Layer address of component NodeE"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="LinkLayer_NodeF"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="BABEBABE0006"/>
- <parameter id="description" value="Link-Layer address of component NodeF"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="Gn6RemoteAdapterIp"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="192.168.56.11"/>
- <parameter id="description" value="IP address of GN6 remote Adapter"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="Gn6RemoteAdapterPort"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="42000"/>
- <parameter id="description" value="UDP port of GN6 remote Adapter"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsBeaconInterval"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="1000"/>
- <parameter id="description" value="Interval between each beacon sent by TS (ms)"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsLatitude"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="7000"/>
- <parameter id="description" value="Latitude of Test System"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsLongitude"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="520000"/>
- <parameter id="description" value="Longitude of Test System"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="V2gTsRole"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="SECC"/>
- <parameter id="description" value="Is TS SECC or EVCC"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="V2gSeccAddress"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="FE80::1"/>
- <parameter id="description" value="V2gSeccAddress"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="V2gSeccPort"/>
- <parameter id="type" value="integer"/>
- <parameter id="default" value="32000"/>
- <parameter id="description" value="V2gSeccPort"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="UtSecuredMode"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="false"/>
- <parameter id="description" value="UpperTester Secured mode status"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsSecuredRootPath"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default"/>
- <parameter id="description" value="Secured root path to access certificates and private keys"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsSecuredConfiId"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default"/>
- <parameter id="description" value="Secured configuration identifier"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="TsItsAidOther"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="38"/>
- <parameter id="description" value="ITS-AID for other profile"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssControllerAddress"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="192.168.89.106"/>
- <parameter id="description" value="IP address of GNSS Controller"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssScenarioSupport"/>
- <parameter id="type" value="boolean"/>
- <parameter id="default">
- <value>
- <Values:boolean xmlns:Values="Values.xsd" type="boolean">
- <Values:value>true</Values:value>
- </Values:boolean>
- </value>
- </parameter>
- <parameter id="description" value="Is GNSS scenario support available?"/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssScenario_StaticPos"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\StaticPos\StaticPos.scn"/>
- <parameter id="description" value="Path to the GNSS scenario - static position."/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssScenario_DynamicPos200m"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos200m\DynamicPos200m.scn"/>
- <parameter id="description" value="Path to the GNSS scenario - dynamic position 200m."/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssScenario_DynamicPos1000m"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1000m\DynamicPos1000m.scn"/>
- <parameter id="description" value="Path to the GNSS scenario - dynamic position 1000m."/>
- </parameter>
- <parameter id="taParamDeclaration">
- <parameter id="name" value="GnssScenario_DynamicPos1500m"/>
- <parameter id="type" value="charstring"/>
- <parameter id="default" value="C:\Program Files (x86)\Spirent Communications\Positioning Application\Scenarios\C2C\DynamicPos1500m\DynamicPos1500m.scn"/>
- <parameter id="description" value="Path to the GNSS scenario - dynamic position 1500m."/>
- </parameter>
- </parameter>
- <parameter id="name" value="ITS System Adapter"/>
- <parameter id="description" value="The ITS System Adapter providing the communication functionality to and from the SUT."/>
- </extension>
-</plugin>
Index: AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues/TT3plugin.xml (nonexistent)
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.its.codec.ttcn.LibItsFsap_TypesAndValuesCodec" name="LibItsFsap_TypesAndValues Codec" provider-name="STF424_ITS_Test_Platform" version="1.0.0.0">
- <runtime>
- <library name="LibItsFsap_TypesAndValuesCodec.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="org.etsi.its.codec"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues
===================================================================
--- AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues (revision 2747)
+++ AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues (nonexistent)
/AdapterFramework/tt3plugins/LibItsFsap_TypesAndValues
Property changes:
Deleted: tsvn:logminsize
## -1 +0,0 ##
-5
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsCommonCodec/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsCommonCodec/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsCommonCodec/TT3plugin.xml (nonexistent)
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.its.codec" name="ETSI Its Common Codec" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiItsCommonCodec.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiItsCommonCodec
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsCommonCodec (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsCommonCodec (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsCommonCodec
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiItsCommonCodec.jar
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185-javadoc.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185-javadoc.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185-javadoc.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185-javadoc.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/v2x-client-1.12.0-b185-javadoc.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/rxjava-1.0.8.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/rxjava-1.0.8.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/rxjava-1.0.8.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/rxjava-1.0.8.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Commsignia/rxjava-1.0.8.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/GSon/gson-2.3.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/GSon/gson-2.3.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/GSon/gson-2.3.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/GSon/gson-2.3.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/GSon/gson-2.3.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/TT3plugin.xml (nonexistent)
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.its.adapter" name="ETSI Its Adapter" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiItsAdapter.jar"/>
- <library name="GSon/gson-2.3.jar"/>
- <library name="jnetpcap-1.4.r1425/jnetpcap.jar"/>
- <library name="jpcap-0.7/lib/jpcap.jar"/>
- <library name="Preserve/bcprov-jdk16-146.jar"/>
- <library name="Preserve/commons-codec-1.4.jar"/>
- <library name="Preserve/CryptoLib.jar"/>
- <library name="Preserve/de.fraunhofer.sit.c2x.pki.ca.jar"/>
- <library name="Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar"/>
- <library name="Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar"/>
- <library name="Preserve/joda-time-2.0.jar"/>
- <library name="Preserve/pax-logging-api-1.6.10.jar"/>
- <library name="Commsignia/rxjava-1.0.8.jar"/>
- <library name="Commsignia/v2x-client-1.12.0-b185.jar"/>
- <library name="../../build"/>
- <native path="GSon"/>
- <native path="jpcap-0.7"/>
- <native path="jnetpcap-1.4.r1425"/>
- <native path="Preserve"/>
- <native path="Commsignia"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- <reference id="org.etsi.adapter"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/joda-time-2.0.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/joda-time-2.0.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/joda-time-2.0.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/joda-time-2.0.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/joda-time-2.0.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/commons-codec-1.4.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/commons-codec-1.4.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/commons-codec-1.4.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/commons-codec-1.4.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/commons-codec-1.4.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/CryptoLib.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/CryptoLib.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/CryptoLib.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/CryptoLib.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/CryptoLib.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.etsi_ts103097v1114.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.libs.custom-guice.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/bcprov-jdk16-146.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/bcprov-jdk16-146.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/bcprov-jdk16-146.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/bcprov-jdk16-146.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/bcprov-jdk16-146.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.ca.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.ca.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.ca.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.ca.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/de.fraunhofer.sit.c2x.pki.ca.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/pax-logging-api-1.6.10.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/pax-logging-api-1.6.10.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/pax-logging-api-1.6.10.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/pax-logging-api-1.6.10.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve/pax-logging-api-1.6.10.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/Preserve
Property changes:
Deleted: tsvn:logminsize
## -1 +0,0 ##
-5
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_flow.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_flow.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_flow.h (nonexistent)
@@ -1,53 +0,0 @@
-/* Header for analysis_flow utility methods */
-
-#ifndef _Included_packet_flow_h
-#define _Included_packet_flow_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include <stdint.h>
-#include <stdint.h>
-#include "export.h"
-
-#include <jni.h>
-#include "org_jnetpcap_packet_JFlowKey.h"
-
-#define FLOW_KEY_PAIR_COUNT org_jnetpcap_packet_JFlowKey_FLOW_KEY_PAIR_COUNT
-
-struct scan_t; // Forward reference
-
-/*
- * Flow key is made up of several key pairs. In order for a flow key to be
- * equal to another flow key, all the pair values must match. The flow pairs
- * can be bi-directional. If uni directional flag is not set, it means that the
- * second array of pairs is also in use and the values there are exact pair
- * reversal of the first array of pairs.
- */
-typedef struct flow_key_t {
- uint64_t header_map; // bitmap of header IDs part of this flowkey
- uint32_t hash; // Hashcode
-#define FLOW_KEY_FLAG_REVERSABLE_PAIRS org_jnetpcap_packet_JFlowKey_FLAG_REVERSABLE
- uint16_t flags; // flags
- uint16_t pair_count; // number of pairs upto FLOW_KEY_PAIR_COUNT
- uint8_t id[FLOW_KEY_PAIR_COUNT];
- uint32_t forward_pair[FLOW_KEY_PAIR_COUNT][2];
- uint32_t reverse_pair[FLOW_KEY_PAIR_COUNT][2];
-} flow_key_t;
-
-/**
- * Based on the first part of the key, it sets the second part of the key
- * using reversed direction values for each pair. flow_key_t->pair[2] is a
- * multi-dimensional array that has 2 sets of key pairs. [0] for forward keys
- * and [1] for reverse direction keys.
- */
-void flow_key_init(flow_key_t *key, int id);
-
-void process_flow_key(scan_t *scan);
-
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ids.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ids.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ids.h (nonexistent)
@@ -1,32 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_winpcap_ids_h
-#define _Included_winpcap_ids_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include "export.h"
-
-#include <jni.h>
-
-// WinPcapSamp
-extern jclass winPcapSampClass;
-extern jfieldID winPcapSampPhysicalFID;
-extern jmethodID winPcapSampConstructorMID;
-
-// WinPcapStat
-extern jclass WinPcapStatClass;
-extern jmethodID WinPcapStatConstructorMID;
-
-// WinPcapRmtAuth
-extern jclass winPcapRmtAuthClass;
-extern jfieldID winPcapRmtAuthTypeFID;
-extern jfieldID winPcapRmtAuthUsernameFID;
-extern jfieldID winPcapRmtAuthPasswordFID;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_ids.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_ids.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_ids.h (nonexistent)
@@ -1,89 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_jnetpcap_ids_h
-#define _Included_jnetpcap_ids_h
-
-#include "export.h"
-
-#include <jni.h>
-
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-extern jclass pcapClass;
-extern jclass byteBufferClass;
-extern jclass stringBuilderClass;
-extern jclass pcapIfClass;
-extern jclass pcapAddrClass;
-extern jclass PcapSockAddrClass;
-extern jclass pcapIntegerClass;
-extern jclass JBufferHandlerClass;
-extern jclass ByteBufferHandlerClass;
-extern jclass JPacketHandlerClass;
-extern jclass PcapPacketHandlerClass;
-
-extern jmethodID byteBufferIsDirectMID;
-extern jmethodID bufferGetPositionMID;
-extern jmethodID bufferGetLimitMID;
-extern jmethodID bufferSetLimitMID;
-extern jmethodID bufferSetPositionMID;
-extern jmethodID bufferGetPositionMID;
-extern jmethodID bufferGetCapacityMID;
-extern jmethodID JBufferHandlerNextPacketMID;
-extern jmethodID ByteBufferHandlerNextPacketMID;
-extern jmethodID JPacketHandlerNextPacketMID;
-extern jmethodID PcapPacketHandlerNextPacketMID;
-
-
-extern jclass msIpAdapterIndexMapClass;
-
-extern jfieldID pcapPhysicalFID;
-extern jfieldID pcapIntegerValueFID;
-
-
-extern jfieldID PcapPktHdrSecondsFID;
-extern jfieldID PcapPktHdrUSecondsFID;
-extern jfieldID PcapPktHdrCaplenFID;
-extern jfieldID PcapPktHdrLenFID;
-
-extern jfieldID PcapPktBufferFID;
-
-extern jfieldID pcapIfNextFID;
-extern jfieldID pcapIfNameFID;
-extern jfieldID pcapIfDescriptionFID;
-extern jfieldID pcapIfAddressesFID;
-extern jfieldID pcapIfFlagsFID;
-
-extern jfieldID pcapAddrNextFID;
-extern jfieldID pcapAddrAddrFID;
-extern jfieldID pcapAddrNetmaskFID;
-extern jfieldID pcapAddrBroadaddrFID;
-extern jfieldID pcapAddrDstaddrFID;
-
-extern jfieldID PcapSockAddrFamilyFID;
-extern jfieldID PcapSockAddrDataFID;
-
-extern jmethodID pcapConstructorMID;
-extern jmethodID pcapIfConstructorMID;
-extern jmethodID PcapSockAddrConstructorMID;
-extern jmethodID pcapAddrConstructorMID;
-extern jmethodID msIpAdapterIndexMapMID;
-
-extern jmethodID appendMID;
-extern jmethodID setLengthMID;
-
-extern jclass pcapStatClass;
-
-extern jfieldID pcapStatRecvFID;
-extern jfieldID pcapStatDropFID;
-extern jfieldID pcapStatIfDropFID;
-extern jfieldID pcapStatCaptFID;
-extern jfieldID pcapStatSentFID;
-extern jfieldID pcapStatNetdropFID;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_in_cksum.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_in_cksum.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_in_cksum.h (nonexistent)
@@ -1,63 +0,0 @@
-/* in_cksum.h
- * Declaration of Internet checksum routine.
- *
- * $Id: in_cksum.h 12117 2004-09-28 00:06:32Z guy $
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-#include <stdio.h>
-#include <stdint.h>
-#include <jni.h>
-
-typedef struct {
- const uint8_t *ptr;
- int len;
-} vec_t;
-
-extern uint16_t in_cksum(const vec_t *vec, int veclen);
-extern uint16_t in_cksum_shouldbe(uint16_t sum, uint16_t computed_sum);
-
-typedef union {
- uint8_t c[2];
- uint16_t s;
-} pad_t;
-
-extern int in_checksum_pad_to_even(
- vec_t *vec,
- int veclen,
- pad_t *pad);
-
-extern int in_checksum_skip_crc16_field(
- const uint8_t *buf, // Buffer ptr
- vec_t *vec,
- int len,
- int crc_offset);
-
-extern int in_checksum_add_ip_pseudo_header(
- const uint8_t *buf,
- vec_t *vec,
- int type,
- int len,
- uint32_t phdr[2]);
-
-extern uint16_t psuedo_ip4_tcp(
- JNIEnv *env,
- const uint8_t *mem,
- size_t size,
- jint ip4,
- jint tcp);
-
-uint16_t psuedo_ip6_tcp(
- JNIEnv *env,
- const uint8_t *mem,
- size_t size,
- jint ip6,
- jint tcp);
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc32.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc32.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc32.h (nonexistent)
@@ -1,80 +0,0 @@
-/* crc32.h
- * Declaration of CRC-32 routine and table
- *
- * $Id: crc32.h 24930 2008-04-12 12:31:53Z stig $
- *
- * Wireshark - Network traffic analyzer
- * By Gerald Combs <[email protected]>
- * Copyright 1998 Gerald Combs
- *
- * Copied from README.developer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __UTIL_CRC32_H_
-#define __UTIL_CRC32_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-#include <stdint.h>
-
-#define CRC32C_PRELOAD 0xffffffff
-
-/*
- * Byte swap fix contributed by Dave Wysochanski <[email protected]>.
- */
-#define CRC32C_SWAP(crc32c_value) \
- (((crc32c_value & 0xff000000) >> 24) | \
- ((crc32c_value & 0x00ff0000) >> 8) | \
- ((crc32c_value & 0x0000ff00) << 8) | \
- ((crc32c_value & 0x000000ff) << 24))
-
-#define CRC32C(c,d) (c=(c>>8)^crc32c_table[(c^(d))&0xFF])
-
-extern const uint32_t crc32c_table[256];
-
-/** Compute CRC32C checksum of a buffer of data.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @param crc The preload value for the CRC32C computation.
- @return The CRC32C checksum. */
-extern uint32_t calculate_crc32c(const void *buf, int len, uint32_t crc);
-
-extern const uint32_t crc32_ccitt_table[256];
-
-/** Compute CRC32 CCITT checksum of a buffer of data.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @return The CRC32 CCITT checksum. */
-extern uint32_t crc32_ccitt(const uint8_t *buf, uint32_t len);
-
-/** Compute CRC32 CCITT checksum of a buffer of data. If computing the
- * checksum over multiple buffers and you want to feed the partial CRC32
- * back in, remember to take the 1's complement of the partial CRC32 first.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @param seed The seed to use.
- @return The CRC32 CCITT checksum (using the given seed). */
-extern uint32_t crc32_ccitt_seed(const uint8_t *buf, uint32_t len, uint32_t seed);
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* util_crc32.h */
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc16.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc16.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_crc16.h (nonexistent)
@@ -1,72 +0,0 @@
-/* crc16.h
- * Declaration of CRC-16 routines and table
- *
- * 2004 Richard van der Hoff <[email protected]>
- *
- * $Id: crc16.h 20485 2007-01-18 18:43:30Z guy $
- *
- * Wireshark - Network traffic analyzer
- * By Gerald Combs <[email protected]>
- * Copyright 1998 Gerald Combs
- *
- * Copied from README.developer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-#ifndef __CRC16_H_
-#define __CRC16_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-#include <stdint.h>
-
-/* Calculate the CCITT/ITU/CRC-16 16-bit CRC
-
- (parameters for this CRC are:
- Polynomial: x^16 + x^12 + x^5 + 1 (0x1021);
- Start value 0xFFFF;
- XOR result with 0xFFFF;
- First bit is LSB)
-*/
-
-/** Compute CRC16 CCITT checksum of a buffer of data.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @return The CRC16 CCITT checksum. */
-extern uint16_t crc16_ccitt(const uint8_t *buf, uint32_t len);
-
-/** Compute CRC16 X.25 CCITT checksum of a buffer of data.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @return The CRC16 X.25 CCITT checksum. */
-extern uint16_t crc16_x25_ccitt(const uint8_t *buf, uint32_t len);
-
-/** Compute CRC16 CCITT checksum of a buffer of data. If computing the
- * checksum over multiple buffers and you want to feed the partial CRC16
- * back in, remember to take the 1's complement of the partial CRC16 first.
- @param buf The buffer containing the data.
- @param len The number of bytes to include in the computation.
- @param seed The seed to use.
- @return The CRC16 CCITT checksum (using the given seed). */
-extern uint16_t crc16_ccitt_seed(const uint8_t *buf, uint32_t len, uint16_t seed);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* crc16.h */
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_dumper.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_dumper.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_dumper.h (nonexistent)
@@ -1,27 +0,0 @@
-#include <jni.h>
-/* Header for jnetpcap_dumper methods */
-
-#ifndef _Included_org_jnetpcap_PcapDumper
-#define _Included_org_jnetpcap_PcapDumper
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-extern jclass pcapDumperClass;
-
-extern jclass pcapDumperClass;
-
-extern jmethodID pcapDumperConstructorMID;
-
-extern jfieldID pcapDumperPhysicalFID;
-
-// Prototypes
-void setPcapDumper(JNIEnv *env, jobject obj, pcap_dumper_t *dumper);
-pcap_dumper_t *getPcapDumper(JNIEnv *env, jobject obj);
-jobject newPcapDumper(JNIEnv *env, pcap_dumper_t *dumper);
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ext.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ext.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_ext.h (nonexistent)
@@ -1,18 +0,0 @@
-#include <jni.h>
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_org_jnetpcap_WinPcapExtensions
-#define _Included_org_jnetpcap_WinPcapExtensions
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-extern jclass winPcapClass;
-
-// Prototypes
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/export.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/export.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/export.h (nonexistent)
@@ -1,23 +0,0 @@
-
-// Include this file after jni.h is included. It undefines MS compiler, def for
-// gcc specific one.
-//
-#ifndef Include_export_h
-#define Include_export_h
-
-// JNIEXPORT is designed for microsoft compilers, we're using gcc to compile
-#ifdef JNIEXPORT
-#undef JNIEXPORT
-#endif
-#undef JNIEXPORT
-#define JNIEXPORT extern "C"
-
-#undef __declspec
-#define __declspec(a) extern "C"
-
-#ifndef FALSE
-#define TRUE 1
-#define FALSE !TRUE
-#endif
-
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_debug.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_debug.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/util_debug.h (nonexistent)
@@ -1,96 +0,0 @@
-
-// Include this file after jni.h is included. It undefines MS compiler, def for
-// gcc specific one.
-//
-#ifndef Include_util_debug_h
-#define Include_util_debug_h
-
-#define JNIEXPORT extern "C"
-
-#undef __declspec
-#define __declspec(a) extern "C"
-
-#include <stdarg.h>
-
-#define DEBUG_MAX_LEVEL 10
-
-#define DEBUG_TRACE 10
-#define DEBUG_INFO 8
-#define DEBUG_WARN 6
-#define DEBUG_ERROR 4
-
-#define DEFAULT_LEVEL DEBUG_TRACE
-#define DEFAULT_INDENT_CHAR '.'
-
-extern int debug_get_level();
-extern void debug_set_level(int level);
-extern void debug_inc();
-extern void debug_dec();
-extern void debug_reset();
-extern void debug_vmsg(const char *type, const char *msg, const char *fmt, va_list ap);
-extern void debug_msg(const char *type, const char *msg, const char *fmt, ...);
-extern void debug_trace(const char *msg, const char *fmt, ...);
-extern void debug_warn(const char *msg, const char *fmt, ...);
-extern void debug_error(const char *msg, const char *fmt, ...);
-extern void debug_info(const char *msg, const char *fmt, ...);
-extern void debug_enter(const char *method);
-extern void debug_exit(const char *method);
-
-#define DEBUG_MAX_NAME 256
-#define DEBUG_DEFAULT_LEVEL TRACE
-
-/***
- ******** Temporarily backedout
-class Debug {
-public:
- enum Level {
- ALL,
- TRACE,
- INFO,
- WARN,
- ERR,
- NONE,
- UNDEFINED
- };
-
-private:
- Level level;
- int indentation;
- char indentBuffer[DEBUG_MAX_LEVEL + 2];
- char indentChar;
- Debug *parent;
- char name[DEBUG_MAX_NAME];
-
-public:
- Debug(const char *name, Debug *parent);
- Debug(const char *name);
- Debug(const char *name, Level defaultLevel);
- ~Debug() { }
- void setLevel(Level level);
- Level getLevel();
- void inc();
- void dec();
- void reset();
-
- void msg(Level type, char *msg, char *fmt, ...);
- void trace(char *msg, char *fmt, ...);
- void info(char *msg, char *fmt, ...);
- void warn(char *msg, char *fmt, ...);
- void error(char *msg, char *fmt, ...);
-
- void enter(char *method);
- void exit(char *method);
-
-
-private:
- void vmsg(Level type, char *msg, char *fgm, va_list ap);
- char *indent();
- char *getLevelName(Level level);
- static char *levelNames[ERR + 1];
- static Debug global_logger;
- static Debug null_logger;
-};
-
-****************/
-
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/analysis.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/analysis.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/analysis.h (nonexistent)
@@ -1,51 +0,0 @@
-/* Header for analysis_flow utility methods */
-
-#ifndef _Included_analysis_h
-#define _Included_analysis_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include <stdint.h>
-#include <stdint.h>
-#include "export.h"
-
-#include <jni.h>
-#include "org_jnetpcap_packet_analysis_Analysis.h"
-#include "org_jnetpcap_packet_analysis_AnalysisUtils.h"
-
-#define ROOT_TYPE org_jnetpcap_analysis_AnalysisUtils_ROOT_TYPE
-
-/*
- * A header for every analysis object
- */
-typedef struct analysis_t {
- uint16_t type;
- uint16_t len; // length so we can walk unknown analysis types
-} analysis_t;
-
-/*
- * Roots are embeded in packet_state_t and header_state_t objects
- */
-typedef struct root_analysis_t {
- uint16_t type; // == ROOT_TYPE
- uint16_t len; // length so we can walk unknown analysis types
-
- analysis_t *child;
-};
-
-
-typedef void (*native_analyzer_func_t)(packet_state_t *packet);
-extern native_analyzer_func_t native_analyzers[];
-
-typedef struct analyzer_t {
-
- native_analyzer_func_t analyzers[64][4];
-
-} analyzer_t;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_utils.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_utils.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_utils.h (nonexistent)
@@ -1,179 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_org_jnetpcap_Pcap_utils
-#define _Included_org_jnetpcap_Pcap_utils
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include "export.h"
-
-#include <jni.h>
-#include "packet_jscanner.h"
-
-/*
- * LIBPCAP versions that specify when each feature or function was first
- * introduced. The format of the value is a collapsed version number. That is
- * Actual libpcap version number 0.9.3 is first collapsed to 093 and then a
- * 0x prefixed otherwise compiler complains that its a out-of-range octal value.
- * So 0.9.3 becomes 0x093 and for our comparison purposes is sufficient to ensure
- * correct libpcap version level.
- */
-#define LIBPCAP_PCAP_SENDPACKET 0x093
-#define LIBPCAP_PCAP_INJECT 0x097
-
-
-#define ILLEGAL_STATE_EXCEPTION "java/lang/IllegalStateException"
-#define ILLEGAL_ARGUMENT_EXCEPTION "java/lang/IllegalArgumentException"
-#define CLASS_NOT_FOUND_EXCEPTION "java/lang/ClassNotFoundException"
-#define NO_SUCH_METHOD_EXCEPTION "java/lang/NoSuchMethodException"
-#define NO_SUCH_FIELD_EXCEPTION "java/lang/NoSuchFieldException"
-#define INDEX_OUT_OF_BOUNDS_EXCEPTION "java/lang/IndexOutOfBoundsException"
-#define NULL_PTR_EXCEPTION "java/lang/NullPointerException"
-#define UNSUPPORTED_OPERATION_EXCEPTION "java/lang/UnsupportedOperationException"
-#define PCAP_CLOSED_EXCEPTION "org/jnetpcap/PcapClosedException"
-#define PCAP_EXTENSION_NOT_AVAILABLE_EXCEPTION "org/jnetpcap/PcapExtensionNotAvailableException"
-#define OUT_OF_MEMORY_ERROR "java/lang/OutOfMemoryError"
-#define BUFFER_OVERFLOW_EXCEPTION "java/nio/BufferOverflowException"
-#define BUFFER_UNDERFLOW_EXCEPTION "java/nio/BufferUnderflowException"
-#define READ_ONLY_BUFFER_EXCETPION "java/nio/ReadOnlyBufferException"
-#define UNREGISTERED_SCANNER_EXCEPTION "org/jnetpcap/packet/UnregisteredHeaderException"
-#define IO_EXCEPTION "java/io/IOException"
-
-extern jclass pcapClass;
-extern jclass pcapHandlerClass;
-extern jclass stringBuilderClass;
-
-extern jfieldID pcapPhysicalFID;
-extern jfieldID pcapIfNextFID;
-
-extern jmethodID pcapConstructorMID;
-extern jmethodID pcapHandlerMID;
-extern jmethodID appendMID;
-extern jmethodID setLengthMID;
-
-/* IDs for packet_jpacket.cpp file */
-extern jclass pcapPacketClass;
-extern jmethodID pcapPacketConstructorMID;
-extern jfieldID pcapStateFID;
-extern jfieldID pcapHeaderFID;
-
-
-// GENERIC utilities
-const char *toCharArray(JNIEnv *env, jstring jstr, char *buf);
-jstring toJavaString(JNIEnv *env, const char *buf);
-jlong toLong(void *ptr);
-void *toPtr(jlong lp);
-
-jclass getClass(JNIEnv *env, char *clazz);
-
-
-/*
- * PCAP class related utilities
- */
-
-/*
- * Structure which holds information for a callback from dispatch and loop.
- * Holds enough information so we can callback to Java handler and still return
- * the original generic user data object.
- */
-typedef struct pcap_user_data_t {
- JNIEnv *env;
- jobject obj;
- jobject pcap;
- jobject user;
- jclass clazz;
- jthrowable exception; // Any exceptions to rethrow
- jmethodID mid;
- pcap_t *p;
-
-} pcap_user_data_t;
-
-typedef struct cb_byte_buffer_t {
- pcap_t *p;
- jmethodID mid;
- JNIEnv *env; // thread
- jobject obj; // ByteBufferHandler
- jobject pcap;
- jthrowable exception; // Any exceptions to rethrow
- jobject user;
- jobject header; // PcapHeader
-} cb_byte_buffer_t;
-
-typedef struct cb_jbuffer_t {
- pcap_t *p;
- jmethodID mid;
- JNIEnv *env; // thread
- jobject obj; // JBufferHandler
- jobject pcap;
- jthrowable exception; // Any exceptions to rethrow
- jobject user;
- jobject header; // PcapHeader
- jobject buffer; // JBuffer
-} cb_jbuffer_t;
-
-#define DEBUG_INJECT_PACKET_BREAK_LOOP 1
-typedef struct cb_packet_t {
- pcap_t *p;
- jmethodID mid;
- JNIEnv *env; // thread
- jobject obj; // JPacketHandler
- jobject pcap;
- jthrowable exception; // Any exceptions to rethrow
- jobject user;
- jobject header; // PcapHeader
- jobject packet; // JPacket
- jobject state; // JPacket.State
- jint id; // Header ID
- jobject scanner; // JScanner
- int flags; // Flags used when inject packet is used
-
-} cb_jpacket_t;
-
-
-
-extern "C"
-void pcap_callback(u_char*, const pcap_pkthdr*, const u_char*);
-void cb_byte_buffer_dispatch(u_char*, const pcap_pkthdr*, const u_char*);
-void cb_jbuffer_dispatch(u_char*, const pcap_pkthdr*, const u_char*);
-void cb_pcap_packet_dispatch(u_char*, const pcap_pkthdr*, const u_char*);
-void cb_pcap_dumper_handler(u_char*, const pcap_pkthdr*, const u_char*);
-
-pcap_t *getPcap(JNIEnv *env, jobject obj);
-jmethodID getPcapHandlerMID(JNIEnv *env);
-jfieldID getPcapPhysicalFID(JNIEnv *env, jclass clazz);
-jlong getPhysical(JNIEnv *, jobject);
-void setPhysical(JNIEnv *, jobject, jlong);
-void setString(JNIEnv *env, jobject buffer, const char *);
-jmethodID getPcapConstructorMID(JNIEnv *env, jclass clazz);
-pcap_pkthdr *getPktHeader(JNIEnv *env, jobject jpkt_header, pcap_pkthdr *pkt_header);
-void setPktHeader(JNIEnv *env, jobject jpkt_header, pcap_pkthdr *pkt_header);
-void setPktBuffer(JNIEnv *env, jobject jpkt_buffer, jobject jbuffer);
-jclass findClass(JNIEnv *env, const char *name);
-jmethodID findMethod(JNIEnv *env, jobject obj, const char *name, const char *signature);
-
-jobject newPcapAddr(JNIEnv *env, jobject jlist, jmethodID MID_add, pcap_addr *addr);
-jobject newPcapIf(JNIEnv *env, jobject jlist, jmethodID MID_add, pcap_if_t *ifp);
-jobject newPcapSockAddr(JNIEnv *env, sockaddr *a);
-
-void setPcapStat(JNIEnv *env, jobject jstats, pcap_stat *stats);
-
-void throwException(JNIEnv *env, const char *exception, const char *message);
-void throwVoidException(JNIEnv *env, const char *exception);
-
-/*
- * Creates a new PcapPacket object, allocates a new memory block and copies
- * header, state and packet data into the buffer. Then peers all the packet
- * structures to point at the buffer.
- */
-jobject transferToNewBuffer(
- JNIEnv *env,
- const pcap_pkthdr *pkt_header,
- const u_char *pkt_data,
- jobject state);
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jmemory.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jmemory.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jmemory.h (nonexistent)
@@ -1,88 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_nio_jmemory_h
-#define _Included_nio_jmemory_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include <stdint.h>
-#include "export.h"
-
-#include <jni.h>
-
-typedef struct memory_usage_t {
- uint64_t total_allocated;
- uint64_t total_deallocated;
-
- uint64_t total_allocate_calls;
- uint64_t total_deallocate_calls;
-
- uint64_t seg_0_255_bytes;
- uint64_t seg_256_or_above_bytes;
-
- uint64_t max_direct;
- uint64_t soft_direct;
- uint64_t reserved_direct;
- uint64_t available_direct;
-
-} memory_usage_t;
-
-typedef struct jni_global_ref_t {
- int count; // Number of references held
- jobject reference[]; // array of references held
-} jni_global_ref_t;
-
-
-extern jclass jmemoryClass;
-extern jclass jmemoryPoolClass;
-extern jclass jmemoryReferenceClass;
-
-extern jmethodID jmemoryToDebugStringMID;
-extern jmethodID jmemoryMaxDirectMemoryBreachMID;
-extern jmethodID jmemorySoftDirectMemoryBreachMID;
-extern jmethodID jmemoryCleanupMID;
-extern jmethodID jmemoryPeer0MID;
-extern jmethodID jmemoryAllocateMID;
-extern jmethodID jmemorySetSize0MID;
-
-extern jfieldID jmemoryPhysicalFID;
-extern jfieldID jmemorySizeFID;
-extern jfieldID jmemoryOwnerFID;
-extern jfieldID jmemoryKeeperFID;
-extern jfieldID jmemoryRefFID;
-extern jfieldID jmemoryRefAddressFID;
-extern jobject jmemoryPOINTER_CONST; // JMemory.POINTER constant reference
-
-extern jmethodID jmemoryPoolAllocateExclusiveMID;
-extern jmethodID jmemoryPoolDefaultMemoryPoolMID;
-
-extern jobject defaultMemoryPool;
-
-extern memory_usage_t memory_usage;
-
-// Prototypes
-void init_jmemory(JNIEnv *env);
-void *getJMemoryPhysical(JNIEnv *env, jobject obj);
-void setJMemoryPhysical(JNIEnv *env, jobject obj, jlong value);
-void jmemoryCleanup(JNIEnv *env, jobject obj);
-
-jint jmemoryPeer(JNIEnv *env, jobject obj, const void *ptr, size_t length, jobject owner);
-
-char *jmemoryPoolAllocate(JNIEnv *env, size_t size, jobject *obj_ref);
-void jmemoryResize(JNIEnv *env, jobject obj, size_t size);
-char *jmemoryAllocate(JNIEnv *env, size_t size, jobject obj);
-char *jmemoryToDebugString(JNIEnv *env, jobject obj, char *buf);
-
-#ifdef ENABLE_ASSERT
-#define TOKEN_TO_STRING(TOK) # TOK
-#define ASSERT(cond) if (!(cond)) { fprintf(stderr, "ASSERT FAILED: %s:%d \"%s\"\n", __FILE__, __LINE__, TOKEN_TO_STRING(cond)); fflush(stderr); exit(1);}
-#else
-#define ASSERT(cond)
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jbuffer.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jbuffer.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/nio_jbuffer.h (nonexistent)
@@ -1,102 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_nio_jbuffer_h
-#define _Included_nio_jbuffer_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include "export.h"
-
-#include <jni.h>
-
-
-/****************************************************************
- * **************************************************************
- *
- * JNI IDs
- *
- * **************************************************************
- ****************************************************************/
-extern jfieldID jbufferOrderFID;
-extern jfieldID jbufferReadonlyFID;
-
-/****************************************************************
- * **************************************************************
- *
- * ENDIAN MACROS - swap bytes for proper endianess
- *
- * **************************************************************
- ****************************************************************/
-#define ENDIAN16_ATOM_SWAP(data) (\
- ((((uint16_t)data) >> 8) & 0x00FF) | ((((uint16_t)data) << 8) & 0xFF00))
-
-#define ENDIAN32_ATOM_SWAP(data) (\
- ( (((uint32_t)data) >> 24) & 0x000000FF) | ((((uint32_t)data) >> 8) & 0x0000FF00) |\
- ( (((uint32_t)data) << 8) & 0x00FF0000) | ((((uint32_t)data) << 24) & 0xFF000000))
-
-#define ENDIAN64_ATOM_SWAP(data) (\
- ( (((uint64_t)data) >> 56) & 0x00000000000000FFLLU) | ((((uint64_t)data) >> 40) & 0x000000000000FF00LLU) |\
- ( (((uint64_t)data) >> 24) & 0x0000000000FF0000LLU) | ((((uint64_t)data) >> 8) & 0x00000000FF000000LLU) |\
- ( (((uint64_t)data) << 8) & 0x000000FF00000000LLU) | ((((uint64_t)data) << 24) & 0x0000FF0000000000LLU) |\
- ( (((uint64_t)data) << 40) & 0x00FF000000000000LLU) | ((((uint64_t)data) << 56) & 0xFF00000000000000LLU) \
- )
-
-#define ENDIAN16_PTR_SWAP(data) \
- ((uint16_t)*(data + 0) << 8) | ((uint16_t)*(data + 1))
-
-#define ENDIAN32_PTR_SWAP(data) \
- ((uint32_t)*(data + 0) << 24) | ((uint32_t)*(data + 3) ) |\
- ((uint32_t)*(data + 1) << 16) | ((uint32_t)*(data + 2) << 8)
-
-#define ENDIAN64_PTR_SWAP(data) \
- ((uint64_t)*(data + 0) << 56) | ((uint64_t)*(data + 7) ) |\
- ((uint64_t)*(data + 1) << 48) | ((uint64_t)*(data + 6) << 8) |\
- ((uint64_t)*(data + 2) << 40) | ((uint64_t)*(data + 5) << 16) |\
- ((uint64_t)*(data + 3) << 32) | ((uint64_t)*(data + 4) << 24)
-
-/*
- * These macros test for requested BIG ENDIAN condition and appropriately define
- * the correct byte swap macro for various CPU ENDIAN platforms.
- *
- * Usage - if cond is TRUE will ensure that BIG_ENDIAN is returned on both
- * LITTLE AND BIG platforms. If cond is FALSE then LITTLE_ENDIAN will be
- * returned.
- */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define ENDIAN16_GET(big, data) ((big == JNI_TRUE)?ENDIAN16_ATOM_SWAP(data):data)
-#define ENDIAN32_GET(big, data) ((big == JNI_TRUE)?ENDIAN32_ATOM_SWAP(data):data)
-#define ENDIAN64_GET(big, data) ((big == JNI_TRUE)?ENDIAN64_ATOM_SWAP(data):data)
-
-#define BIG_ENDIAN16(data) ENDIAN16_ATOM_SWAP(data)
-#define BIG_ENDIAN32(data) ENDIAN32_ATOM_SWAP(data)
-#define BIG_ENDIAN64(data) ENDIAN64_ATOM_SWAP(data)
-
-#define LITTLE_ENDIAN16(data) data
-#define LITTLE_ENDIAN32(data) data
-#define LITTLE_ENDIAN64(data) data
-
-#elif __BYTE_ORDER == __BIG_ENDIAN
-#define ENDIAN16_GET(big, data) ((big == JNI_TRUE)?data:ENDIAN16_ATOM_SWAP(data))
-#define ENDIAN32_GET(big, data) ((big == JNI_TRUE)?data:ENDIAN32_ATOM_SWAP(data))
-#define ENDIAN64_GET(big, data) ((big == JNI_TRUE)?data:ENDIAN64_ATOM_SWAP(data))
-
-#define BIG_ENDIAN16(data) data
-#define BIG_ENDIAN32(data) data
-#define BIG_ENDIAN64(data) data
-
-#define LITTLE_ENDIAN16(data) ENDIAN16_ATOM_SWAP(data)
-#define LITTLE_ENDIAN32(data) ENDIAN32_ATOM_SWAP(data)
-#define LITTLE_ENDIAN64(data) ENDIAN64_ATOM_SWAP(data)
-
-#else
-# error "ENDIAN MACROS NOT DEFINED :("
-#endif
-
-
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_stat_ex.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_stat_ex.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/winpcap_stat_ex.h (nonexistent)
@@ -1,22 +0,0 @@
-#include <jni.h>
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_org_jnetpcap_WinWinPcapStat
-#define _Included_org_jnetpcap_WinWinPcapStat
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-extern jclass winWinPcapStatClass;
-
-// Prototypes
-jobject newWinPcapStat(JNIEnv *env);
-void setWinPcapStat(JNIEnv *env, jobject jstats, struct pcap_stat *stats,
- int size);
-
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_protocol.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_protocol.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_protocol.h (nonexistent)
@@ -1,455 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_jnetpcap_packet_protocol_h
-#define _Included_jnetpcap_packet_protocol_h
-#ifdef __cplusplus
-
-#include <stdint.h>
-
-#include "export.h"
-#include <jni.h>
-#include "nio_jbuffer.h"
-#include "org_jnetpcap_protocol_JProtocol.h"
-#include "org_jnetpcap_packet_JScan.h"
-
-#define END_OF_HEADERS org_jnetpcap_packet_JScan_END_OF_HEADERS_ID
-#define ETHERNET_ID org_jnetpcap_protocol_JProtocol_ETHERNET_ID
-#define TCP_ID org_jnetpcap_protocol_JProtocol_TCP_ID
-#define UDP_ID org_jnetpcap_protocol_JProtocol_UDP_ID
-#define IEEE_802DOT3_ID org_jnetpcap_protocol_JProtocol_IEEE_802DOT3_ID
-#define IEEE_802DOT2_ID org_jnetpcap_protocol_JProtocol_IEEE_802DOT2_ID
-#define IEEE_SNAP_ID org_jnetpcap_protocol_JProtocol_IEEE_SNAP_ID
-#define IP4_ID org_jnetpcap_protocol_JProtocol_IP4_ID
-#define IP6_ID org_jnetpcap_protocol_JProtocol_IP6_ID
-#define IEEE_802DOT1Q_ID org_jnetpcap_protocol_JProtocol_IEEE_802DOT1Q_ID
-#define L2TP_ID org_jnetpcap_protocol_JProtocol_L2TP_ID
-#define PPP_ID org_jnetpcap_protocol_JProtocol_PPP_ID
-#define ICMP_ID org_jnetpcap_protocol_JProtocol_ICMP_ID
-#define HTTP_ID org_jnetpcap_protocol_JProtocol_HTTP_ID
-#define HTML_ID org_jnetpcap_protocol_JProtocol_HTML_ID
-#define ARP_ID org_jnetpcap_protocol_JProtocol_ARP_ID
-#define SIP_ID org_jnetpcap_protocol_JProtocol_SIP_ID
-#define SDP_ID org_jnetpcap_protocol_JProtocol_SDP_ID
-#define RTP_ID org_jnetpcap_protocol_JProtocol_RTP_ID
-#define SLL_ID org_jnetpcap_protocol_JProtocol_SLL_ID
-
-#define SCTP_ID org_jnetpcap_protocol_JProtocol_SCTP_ID
-#define SCTP_CHUNK_ID org_jnetpcap_protocol_JProtocol_SCTP_DATA_ID
-#define SCTP_DATA_ID org_jnetpcap_protocol_JProtocol_SCTP_DATA_ID
-#define SCTP_INIT_ID org_jnetpcap_protocol_JProtocol_SCTP_INIT_ID
-#define SCTP_INIT_ACK_ID org_jnetpcap_protocol_JProtocol_SCTP_INIT_ACK_ID
-#define SCTP_SACK_ID org_jnetpcap_protocol_JProtocol_SCTP_SACK_ID
-#define SCTP_HEARTBEAT_ID org_jnetpcap_protocol_JProtocol_SCTP_HEARTBEAT_ID
-#define SCTP_HEARTBEAT_ACK_ID org_jnetpcap_protocol_JProtocol_SCTP_HEARTBEAT_ACK_ID
-#define SCTP_ABORT_ID org_jnetpcap_protocol_JProtocol_SCTP_ABORT_ID
-#define SCTP_SHUTDOWN_ID org_jnetpcap_protocol_JProtocol_SCTP_SHUTDOWN_ID
-#define SCTP_SHUTDOWN_ACK_ID org_jnetpcap_protocol_JProtocol_SCTP_SHUTDOWN_ACK_ID
-#define SCTP_ERROR_ID org_jnetpcap_protocol_JProtocol_SCTP_ERROR_ID
-#define SCTP_COOKIE_ID org_jnetpcap_protocol_JProtocol_SCTP_COOKIE_ID
-#define SCTP_COOKIE_ACK_ID org_jnetpcap_protocol_JProtocol_SCTP_COOKIE_ACK_ID
-#define SCTP_ECNE_ID org_jnetpcap_protocol_JProtocol_SCTP_ECNE_ID
-#define SCTP_CWR_ID org_jnetpcap_protocol_JProtocol_SCTP_CWR_ID
-#define SCTP_SHUTDOWN_COMPLETE_ID org_jnetpcap_protocol_JProtocol_SCTP_SHUTDOWN_COMPLETE_ID
-
-#define RTCP_ID org_jnetpcap_protocol_JProtocol_RTCP_SENDER_REPORT_ID
-#define RTCP_CHUNK_ID org_jnetpcap_protocol_JProtocol_RTCP_SENDER_REPORT_ID
-#define RTCP_SENDER_REPORT_ID org_jnetpcap_protocol_JProtocol_RTCP_SENDER_REPORT_ID
-#define RTCP_RECEIVER_REPORT_ID org_jnetpcap_protocol_JProtocol_RTCP_RECEIVER_REPORT_ID
-#define RTCP_SDES_ID org_jnetpcap_protocol_JProtocol_RTCP_SDES_ID
-#define RTCP_BYE_ID org_jnetpcap_protocol_JProtocol_RTCP_BYE_ID
-#define RTCP_APP_ID org_jnetpcap_protocol_JProtocol_RTCP_APP_ID
-
-#define NULL_HEADER_ID org_jnetpcap_protocol_JProtocol_NULL_HEADER_ID
-
-#define WEB_IMAGE_ID org_jnetpcap_protocol_JProtocol_WEB_IMAGE_ID
-
-#define NETBIOS_ID END_OF_HEADERS
-
-typedef struct null_header_ {
-
- uint32_t type; // PF_ protocol family type
-
-} null_header_t;
-
-#define SCTP_DATA_FLAG_LAST_SEG 0x01
-#define SCTP_DATA_FLAG_FIRST_SEG 0x02
-#define SCTP_DATA_FLAG_ORDERED 0x04
-#define SCTP_DATA_FLAG_DELAY 0x08
-/**
- * SCTP Chunk
- */
-typedef struct sctp_chunk_ {
-
- uint8_t type;
- uint8_t flags;
- uint16_t length;
-
-} sctp_chunk_t;
-
-#define SCTP_LEN 12
-/**
- * Stream Control Transport Protocol
- */
-typedef struct sctp_ {
-
- uint16_t sport;
- uint16_t dport;
- uint32_t tag;
- uint32_t crc32;
-
-} sctp_t;
-
-/*
- * Linux Socket Cooked Capture header - a pseudo header as DL substitute
- */
-#define SLL_LEN 16 // total header length
-#define SLL_ADDR_LEN 8 // length of address field
-
-typedef struct sll_t {
- uint16_t sll_pkttype; // packet type
- uint16_t sll_hatype; // link-layer address type
- uint16_t sll_halen; // link-layer address length
- uint8_t sll_addr[SLL_ADDR_LEN]; // link-layer address
- uint16_t sll_protocol; // protocol
-} sll_t;
-
-/*
- * Realtime Transfer Protocol and extension
- */
-#define RTP_LENGTH 12
-#define RTPX_LENGTH 4
-
-typedef struct rtpx_t {
-
- uint16_t rtpx_profile; // Profile specific
- uint16_t rtpx_len; // Length of extension header
-
-} rtpx_t;
-
-/*
- * RTP and RTCP family of protocols
- * See RFC3550
- */
-
-/**
- * RTCP SSRC Sender Report (section 3 of the header)
- */
-typedef struct rtcp_ssrc_ {
- uint32_t ssrc_id; // SSRC identifier of the source
- uint32_t ssrc_fract_loss:8; // Fraction of RTP data lost
- uint32_t ssrc_total_loss:24; // Cumulative of RTP data lost
- uint32_t ssrc_high_seq; // Extended highest seq received
- uint32_t ssrc_jitter; // Interarrival Jitter
- uint32_t ssrc_lsr; // Last SR timestamp
- uint32_t ssrc_dlsr; // Delay since last SR
-
-} rtcp_ssrc_t;
-
-/*
- * RTCP Sender Report (SR)
- * (Section 2 of the header)
- */
-typedef struct rtcp_sr_ {
-
- uint64_t sr_ntp; // NTP timestamp
- uint32_t sr_pkt_count; // Sender's packet count
- uint32_t sr_octet_count; // Sender's octet count
-
-} rtcp_sr_t;
-
-/*
- * RTCP - main static header present in every RTCP packet.
- * RTCP packets are always on odd port number, while RTP on even (see RFC3550)
- * (Section 1 of the header)
- */
-typedef struct rtcp_ {
-
-# if __BYTE_ORDER == __LITTLE_ENDIAN
- uint8_t rtcp_rc:5; // Reception Report Count (RC)
- uint8_t rtcp_pad:1;
- uint8_t rtcp_ver:2; // Must be 2
-
-# elif __BYTE_ORDER == __BIG_ENDIAN
- uint8_t rtcp_ver:2; // Must be 2
- uint8_t rtcp_pad:1;
- uint8_t rtcp_rc:5; // Reception Report Count (RC)
-
-# else
-# error "Adjust your <bits/endian.h> defines"
-# endif
-
- uint8_t rtcp_type; // SR==200, RR==201
- uint16_t rtcp_len; // 32-bit word count (including header -1)
- uint32_t rtcp_ssrc; // Synchronization source ID
-
-} rtcp_t;
-
-
-typedef struct rtp_t {
-
-# if __BYTE_ORDER == __LITTLE_ENDIAN
- uint8_t rtp_cc:4;
- uint8_t rtp_ext:1;
- uint8_t rtp_pad:1;
- uint8_t rtp_ver:2;
-
- uint8_t rtp_type:7;
- uint8_t rtp_marker:1;
-
-# elif __BYTE_ORDER == __BIG_ENDIAN
- uint8_t rtp_ver:2;
- uint8_t rtp_pad:1;
- uint8_t rtp_ext:1;
- uint8_t rtp_cc:4;
-
- uint8_t rtp_marker:1;
- uint8_t rtp_type:7;
-
-# else
-# error "Adjust your <bits/endian.h> defines"
-# endif
-
- uint16_t rtp_seq;
- uint32_t rtp_ts;
- uint32_t rtp_ssrc;
-
-} rtp_t;
-
-
-/*
- * Address Resulution Protocol
- */
-typedef struct arp_t {
- uint16_t htype;
- uint16_t ptype;
- uint8_t hlen;
- uint8_t plen;
-} arp_t;
-
-
-/*
- * Internet Control Message Protocol
- */
-typedef struct icmp_t {
- uint8_t type;
- uint8_t code;
- uint16_t crc;
-
-} icmp_t;
-
-/*
- * Point to Point Protocol
- */
-typedef struct ppp_t {
- uint8_t addr;
- uint8_t control;
- uint16_t protocol;
-} ppt_t;
-
-/*
- * Layer 2 tunneling protocol
- */
-typedef struct l2tp_t {
-# if __BYTE_ORDER == __LITTLE_ENDIAN
- uint16_t p :1;
- uint16_t o :1;
- uint16_t res2 :1;
- uint16_t s :1;
- uint16_t res1 :2;
- uint16_t l :1;
- uint16_t t :1;
- uint16_t version :4;
- uint16_t res3 :4;
-# elif __BYTE_ORDER == __BIG_ENDIAN
- uint16_t t:1;
- uint16_t l:1;
- uint16_t res1:2;
- uint16_t s:1;
- uint16_t res2:1;
- uint16_t o:1;
- uint16_t p:1;
- uint16_t res3:4;
- uint16_t version:4;
-# else
-# error "Adjust your <bits/endian.h> defines"
-# endif
-
-} l2tp_t;
-
-/*
- * IEEE 802.1q VLAN header
- */
-typedef struct vlan_t {
- uint16_t priority :3;
- uint16_t cfi :1;
- uint16_t id :12;
-
- uint16_t type;
-} vlan_t;
-
-/**
- * SNAP IEEE
- */
-typedef union snap_t {
- uint32_t oui :24;
- struct {
- uint16_t reserved[1];
- uint16_t pid;
- };
-} snap_t;
-
-/**
- * LLC IEEE802.2
- */
-typedef struct llc_t {
- uint8_t dsap;
- uint8_t ssap;
- uint8_t control;
- union {
- uint8_t info;
- } ucontrol;
-} llc_t;
-
-/**
- * UDP structure
- */
-typedef struct udp_t {
- uint16_t sport;
- uint16_t dport;
- uint16_t length;
- uint16_t checksum;
-
-} udp_t;
-
-/**
- * TCP structure
- */
-typedef struct tcp_t {
- uint16_t sport;
- uint16_t dport;
- uint32_t seq;
- uint32_t ack_seq;
-# if __BYTE_ORDER == __LITTLE_ENDIAN
- uint16_t res1 :4;
- uint16_t doff :4;
- uint16_t fin :1;
- uint16_t syn :1;
- uint16_t rst :1;
- uint16_t psh :1;
- uint16_t ack :1;
- uint16_t urg :1;
- uint16_t res2 :2;
-# elif __BYTE_ORDER == __BIG_ENDIAN
- uint16_t doff:4;
- uint16_t res1:4;
- uint16_t res2:2;
- uint16_t urg:1;
- uint16_t ack:1;
- uint16_t psh:1;
- uint16_t rst:1;
- uint16_t syn:1;
- uint16_t fin:1;
-# else
-# error "Adjust your <bits/endian.h> defines"
-# endif
- uint16_t window;
- uint16_t check;
- uint16_t urg_ptr;
-} tcp_t;
-
-#define PROTO_ETHERNET_HEADER_LENGTH 14
-#define PROTO_802_3_MAX_LEN 0x600
-
-/**
- * Ethernet 2 structure
- */
-typedef struct ethernet_t {
- uint8_t dhost[6]; /* destination eth addr */
- uint8_t shost[6]; /* destination eth addr */
- uint16_t type; /* destination eth addr */
-} ethernet_t;
-
-/**
- * IP v6 structure
- * RFC 1883
- */
-typedef struct ip6 {
- union {
- struct ip6_hdrctl {
- uint32_t ip6_un1_flow; /* 20 bits of flow-ID */
- uint16_t ip6_un1_plen; /* payload length */
- uint8_t ip6_un1_nxt; /* next header */
- uint8_t ip6_un1_hlim; /* hop limit */
- } ip6_un1;
- uint8_t ip6_un2_vfc; /* 4 bits version, 4 bits class */
- } ip6_ctlun;
- uint8_t ip6_src[16]; /* source address */
- uint8_t ip6_dst[16]; /* destination address */
-} ip6_t;
-
-#define ip6_vfc ip6_ctlun.ip6_un2_vfc
-#define ip6_flow ip6_ctlun.ip6_un1.ip6_un1_flow
-#define ip6_plen ip6_ctlun.ip6_un1.ip6_un1_plen
-#define ip6_nxt ip6_ctlun.ip6_un1.ip6_un1_nxt
-#define ip6_hlim ip6_ctlun.ip6_un1.ip6_un1_hlim
-#define ip6_hops ip6_ctlun.ip6_un1.ip6_un1_hlim
-
-#define IP6_HEADER_LENGTH 40
-
-#define IP6_OPT_HOP_BY_HOP 0
-#define IP6_OPT_DEST_OPTIONS 60
-#define IP6_OPT_ROUTING_HEADER 43
-#define IP6_OPT_FRAGMENT_HEADER 44
-#define IP6_OPT_AUTH_HEADER 51
-#define IP6_OPT_SECURITY_HEADER 50
-#define IP6_OPT_MOBILITY_HEADER 135
-#define IP6_OPT_NO_NEXT_HEADER 59
-
-/**
- * IP v4 structure
- */
-typedef struct ip4 {
-#if __BYTE_ORDER == __LITTLE_ENDIAN
- unsigned int ihl :4;
- unsigned int version :4;
-#elif __BYTE_ORDER == __BIG_ENDIAN
- unsigned int version:4;
- unsigned int ihl:4;
-#else
-# error "Please fix <bits/endian.h>"
-#endif
- uint8_t tos;
- uint16_t tot_len;
- uint16_t id;
- uint16_t frag_off; // flags=3 bits, offset=13 bits
- uint8_t ttl;
- uint8_t protocol;
- uint16_t check;
- uint32_t saddr;
- uint32_t daddr;
- /*The options start here. */
-} ip4_t;
-
-#define IP4_FLAGS_MASK 0xE000
-#define IP4_FRAG_OFF_MASK ~IP4_FLAGS_MASK
-#define IP4_FLAG_MF 0x2000
-#define IP4_FLAG_DF 0x4000
-#define IP4_FLAG_RESERVED 0x8000
-
-
-/****************************************************************
- * **************************************************************
- *
- * Scanner's native and java per protocol prototypes
- *
- * **************************************************************
- ****************************************************************/
-
-int lookup_ethertype(uint16_t type);
-//
-//void scan_ethernet (scan_t *scan);
-//void scan_ip4 (scan_t *scan);
-
-
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/mac_addr.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/mac_addr.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/mac_addr.h (nonexistent)
@@ -1,7 +0,0 @@
-#ifndef __MAC_ADDR_HDR__
-#define __MAC_ADDR_HDR__
-
-extern "C" int mac_addr_dlpi ( char *dev, u_char *addr);
-extern "C" int mac_addr_sys ( char *dev, u_char *addr);
-
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_jscanner.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_jscanner.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/packet_jscanner.h (nonexistent)
@@ -1,374 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_jnetpcap_packet_jscanner_h
-#define _Included_jnetpcap_packet_jscanner_h
-#ifdef __cplusplus
-
-#include <stdint.h>
-
-#include "export.h"
-#include "org_jnetpcap_packet_JScanner.h"
-#include "org_jnetpcap_packet_JRegistry.h"
-#include "org_jnetpcap_packet_JPacket_State.h"
-#include "org_jnetpcap_packet_JHeader_State.h"
-#include "org_jnetpcap_protocol_JProtocol.h"
-#include "packet_flow.h"
-#include "util_debug.h"
-
-/******************************
- ******************************
- */
-#define JREGISTRY org_jnetpcap_packet_JRegistry_
-#define MAX_ID_COUNT org_jnetpcap_packet_JRegistry_MAX_ID_COUNT
-#define MAX_MAP_COUNT (MAX_ID_COUNT / 32)
-#define FLAG_OVERRIDE_LENGTH org_jnetpcap_packet_JRegistry_FLAG_OVERRIDE_LENGTH
-#define FLAG_OVERRIDE_BINDING org_jnetpcap_packet_JRegistry_FLAG_OVERRIDE_BINDING
-#define FLAG_HEURISTIC_BINDING org_jnetpcap_packet_JRegistry_FLAG_HEURISTIC_BINDING
-#define FLAG_HEURISTIC_PRE_BINDING org_jnetpcap_packet_JRegistry_FLAG_HEURISTIC_PRE_BINDING
-
-#define JSCANNER org_jnetpcap_packet_JScanner_
-#define MAX_ENTRY_COUNT org_jnetpcap_packet_JScanner_MAX_ENTRY_COUNT
-
-#define JPROTOCOL org_jnetpcap_protocol_JProtocol_
-#define PAYLOAD_ID org_jnetpcap_protocol_JProtocol_PAYLOAD_ID
-
-#define JPACKET org_jnetpcap_packet_JPacket_State_
-#define PACKET_FLAG_TRUNCATED org_jnetpcap_packet_JPacket_State_FLAG_TRUNCATED
-
-#define JHEADER org_jnetpcap_packet_JHeader_State_
-#define HEADER_FLAG_PREFIX_TRUNCATED org_jnetpcap_packet_JHeader_State_FLAG_PREFIX_TRUNCATED
-#define HEADER_FLAG_HEADER_TRUNCATED org_jnetpcap_packet_JHeader_State_FLAG_HEADER_TRUNCATED
-#define HEADER_FLAG_PAYLOAD_TRUNCATED org_jnetpcap_packet_JHeader_State_FLAG_PAYLOAD_TRUNCATED
-#define HEADER_FLAG_GAP_TRUNCATED org_jnetpcap_packet_JHeader_State_FLAG_GAP_TRUNCATED
-#define HEADER_FLAG_POSTFIX_TRUNCATED org_jnetpcap_packet_JHeader_State_FLAG_POSTFIX_TRUNCATED
-#define HEADER_FLAG_HEURISTIC_BINDING org_jnetpcap_packet_JHeader_State_FLAG_HEURISTIC_BINDING
-#define HEADER_FLAG_CRC_PERFORMED org_jnetpcap_packet_JHeader_State_FLAG_CRC_PERFORMED
-#define HEADER_FLAG_CRC_INVALID org_jnetpcap_packet_JHeader_State_FLAG_CRC_INVALID
-#define HEADER_FLAG_FRAGMENTED org_jnetpcap_packet_JHeader_State_FLAG_HEADER_FRAGMENTED
-#define HEADER_FLAG_SUBHEADERS_DISSECTED org_jnetpcap_packet_JHeader_State_FLAG_SUBHEADERS_DISSECTED
-#define HEADER_FLAG_FIELDS_DISSECTED org_jnetpcap_packet_JHeader_State_FLAG_FIELDS_DISSECTED
-#define HEADER_FLAG_IGNORE_BOUNDS org_jnetpcap_packet_JHeader_State_FLAG_IGNORE_BOUNDS
-#define HEADER_FLAG_HEADER_FRAGMENTED org_jnetpcap_packet_JHeader_State_FLAG_HEADER_FRAGMENTED
-
-/* Cumulative flags. Flags which are passed to subsequent encapsulated headers */
-#define CUMULATIVE_FLAG_HEADER_FRAGMENTED \
- HEADER_FLAG_HEADER_FRAGMENTED | \
- HEADER_FLAG_IGNORE_BOUNDS
-
-#define CUMULATIVE_FLAG_MASK CUMULATIVE_FLAG_HEADER_FRAGMENTED
-
-#define INVALID PAYLOAD_ID
-
-#define ACCESS(offset) if (is_accessible(scan, offset) == FALSE) return;
-
-
-/******************************
- ******************************
- */
-extern jclass jheaderScannerClass;
-
-extern jmethodID scanHeaderMID;
-
-
-/******************************
- ******************************
- */
-
-// Forward references
-struct scanner_t;
-struct packet_state_t;
-struct header_t;
-struct scan_t;
-struct dissect_t;
-
-/*
- * Array of function pointers. These functions perform a per protocol scan
- * and return the next header. They also return the length of the header in
- * the supplied int pointer.
- */
-void init_native_protocols();
-typedef void (*native_protocol_func_t)(scan_t *scan);
-typedef int (*native_validate_func_t)(scan_t *scan);
-typedef void (*native_dissect_func_t)(dissect_t *dissect);
-typedef void (*native_debug_func_t)(void *hdr);
-
-extern native_protocol_func_t native_protocols[];
-extern native_validate_func_t native_heuristics[MAX_ID_COUNT][MAX_ID_COUNT];
-extern native_debug_func_t native_debug[];
-extern const char *native_protocol_names[];
-
-void callJavaHeaderScanner(scan_t *scan);
-void record_header(scan_t *scan);
-void adjustForTruncatedPacket(scan_t *scan);
-
-
-extern char str_buf[1024];
-
-
-
-/**
- * Experimental structures to be used in header dissection, that is complete header
- * structural breakdown. dissected_t records individual field information within
- * the header. Also record information about sub-headers which are within the
- * main header. Structure within the header is bitbased not byte based since
- * any field within a header might occur at any particular bit offset into the
- * header.
- *
- * Dissectors only record information about non-static fields headers. Static
- * fields don't need description since they are always at the same offset and
- * length.
- */
-
-//#define DISSECTOR_TYPE_FIELD 1
-//#define DISSECTOR_TYPE_HEADER 2
-//
-#define DISSECTOR_FLAG_FIELDS 0x0001
-#define DISSECTOR_FLAG_HEADERS 0x0002
-//
-//typedef union dfield_t {
-// uint8_t dt_id;
-// uint16_t dt_flags;
-// uint16_t dt_offset; // in bits
-// uint16_t dt_length; // in bits
-//} dfield_t;
-
-/*
- * Structure maintains state for the duration of a header dissection.
- */
-typedef struct dissect_t {
- JNIEnv *env;
-
- packet_state_t *d_packet;
- header_t *d_header;
- scanner_t *d_scanner;
-
- uint8_t *d_buf;
- int d_buf_len;
- int d_offset;
-} dissect_t;
-
-#define SCAN_STACK_SIZE 8
-typedef struct scan_stack_ {
-
- int next_id;
- int offset;
-
-} scan_stack_t;
-
-
-/*
- * Structure maintains state for the duration of the scan in progress
- *
- * The structure keeps track of the packet buffer and 3 types of lengths.
- * 1) mem_len is the actual total length of the buffer in memory
- * 2) wire_len is the length of the original packet when it was captured before
- * it was truncated
- * 3) buf_len is the runtime/effectual length of the buffer used by the scanner
- * methods. This length may shrink if a protocol uses postfix for padding
- * or some kind of trailer. The buf_len field is reduced by the scanner
- * for that header by the appropriate amount so that next header doesn't
- * consider the previous header's postfix as valid part of the packet it
- * needs to decode.
- */
-typedef struct scan_t {
- JNIEnv *env;
- jobject jscanner;
- jobject jpacket;
- jobject jscan; // This structure as a java object
- scanner_t *scanner;
-
- packet_state_t *packet;
- header_t *header;
- char *buf;
- int buf_len;
- int wire_len;
- int mem_len;
- int offset;
- int length;
- int id;
- int next_id;
- int flags;
- int sctp_offset;
-
- int stack_index; // # of entries on the stack/Last index
- scan_stack_t stack[SCAN_STACK_SIZE];
-
- int hdr_prefix;
- int hdr_gap;
- int hdr_payload;
- int hdr_postfix;
- int hdr_flags;
- int is_recorded;
-
- int hdr_count;
- int hdr_index;
-
- int dport; // Transport destination port
- int sport; // Transport source port
-} scan_t;
-
-#define SCAN_IS_FRAGMENT(scan) (scan->flags & HEADER_FLAG_FRAGMENTED)
-#define SCAN_IGNORE_BOUNDS(scan) (scan->flags & HEADER_FLAG_IGNORE_BOUNDS)
-#define SCAN_IS_PREFIX_TRUNCATED(scan) (scan->flags & HEADER_FLAG_PREFIX_TRUNCATED)
-#define SCAN_IS_HEADER_TRUNCATED(scan) (scan->flags & HEADER_FLAG_HEADER_TRUNCATED)
-#define SCAN_IS_GAP_TRUNCATED(scan) (scan->flags & HEADER_FLAG_GAP_TRUNCATED)
-#define SCAN_IS_PAYLOAD_TRUNCATED(scan) (scan->flags & HEADER_FLAG_PAYLOAD_TRUNCATED)
-#define SCAN_IS_POSTFIX_TRUNCATED(scan) (scan->flags & HEADER_FLAG_POSTFIX_TRUNCATED)
-
-/*
- * Each header "record" may have the following physical structure:
- * +-------------------------------------------+
- * | prefix | header | gap | payload | postfix |
- * +-------------------------------------------+
- *
- * Offset points at the start of the header, not the prefix. In order to calculate
- * the exact start of the record, you must subtract the prefix length from the
- * offset as follows:
- *
- * prefix_offset = hdr_offset - hdr_prefix;
- *
- * To calculate the offset of the start of the payload:
- *
- * payload_offset = hdr_offset + hdr_length + hdr_gap;
- *
- * To calculate the offset of the start of the postfix
- *
- * postfix_offset = hdr_offset + hdr_length + hdr_gap + hdr_payload;
- *
- * To calculate the end of the header record:
- *
- * end_offset = hdr_offset + hdr_length + hdr_gap + hdr_payload + hdr_postifx;
- *
- * Note that most of the time the fields hdr_prefix, hdr_gap and hdr_postfix
- * will be zero, but this structure does allow a more complex headers in a
- * frame to exist. Some protocols have prefixes such Ethernet2 frames on BSD
- * systems and a trailer (represented as a postfix) which may contains padding,
- * CRC counters etc. Rtp header for example utilizes padding after its payload
- * and so do many other protocols. As of right now, the author is not aware of
- * any protocols utilizing an inter header-to-payload gap, which is another way
- * of saying a header-padding. None the less, the structure for gap is
- * represented here for future compatibility.
- */
-typedef struct header_t {
- uint8_t hdr_id; // header ID
-
- uint8_t hdr_prefix; // length of the prefix (preamble) before the header
- uint8_t hdr_gap; // length of the gap between header and payload
- uint16_t hdr_flags; // flags for this header
- uint16_t hdr_postfix; // length of the postfix (trailer) after the payload
- uint32_t hdr_offset; // offset into the packet_t->data buffer
- uint32_t hdr_length; // length of the header in packet_t->data buffer
- uint32_t hdr_payload; // length of the payload
-
- uint8_t hdr_subcount; // number of sub-headers
- header_t *hdr_subheader; // Index of the first subheader in packet_t
-
- jobject hdr_analysis; // Java JAnalysis based object if not null
-} header_t;
-
-#define ID2MAP(id) (id >> 5)
-#define MASK2MAP(m) (map >> 32)
-#define ID2MASK(id) ((uint64_t)((uint64_t)(id & ~0x1F) << 27) | (1ULL << (id & 0x1F)))
-
-#define PACKET_STATE_ADD_HEADER(pkt, id) pkt->pkt_header_map[ID2MAP(id)] |= ID2MASK(id)
-#define PACKET_STATE_HAS_HEADER(pkt, id) (pkt->pkt_header_map[ID2MAP(id)] & ID2MAP(id) != 0)
-
-typedef struct packet_state_t {
- flow_key_t pkt_flow_key; // Flow key calculated for this packet, must be first
- uint8_t pkt_flags; // flags for this packet
- jobject pkt_analysis; // Java JAnalysis based object if not null
- uint64_t pkt_frame_num; // Packet's frame number assigned by scanner
- uint64_t pkt_header_map[MAX_MAP_COUNT]; // bit map of presence of headers
-
- uint32_t pkt_wirelen; // Original packet size
- uint32_t pkt_caplen; // Original packet size
-
- int8_t pkt_header_count; // total number of main headers found
- header_t pkt_headers[]; // One per header + 1 more for payload
-
- int8_t pkt_subheader_count; // total number of sub headers found
- header_t pkt_subheaders[]; // One per header + 1 more for payload
-} packet_state_t;
-
-typedef struct scanner_t {
- int32_t sc_len; // bytes allocated for sc_packets buffer
-
- uint64_t sc_cur_frame_num; // Current frame number
-
- uint32_t sc_flags[MAX_ID_COUNT]; // protocol flags
-// uint64_t sc_native_header_scanner_map; // java binding map
-
- jobject sc_jscan; // Java JScan structure for interacting with java space
-
- jobject sc_java_header_scanners[MAX_ID_COUNT]; // java scanners
-
- /*
- * A per scanner instance table that can be populated with native and
- * java scanners at the same time.
- */
- native_protocol_func_t sc_scan_table[MAX_ID_COUNT];
- native_validate_func_t sc_heuristics_table[MAX_ID_COUNT][MAX_ID_COUNT]; // Huristic
-
-
- /* Packet and main header ring-buffer */
- int sc_offset; // offset into sc_packets for next packet
- packet_state_t *sc_packet; // ptr into scanner_t where the first packet begins
-
- /* Sub-header ring buffer */
- int sc_sublen; // Length of the sub-header ring-buffer
- int sc_subindex; // sub-header offset
- header_t *sc_subheader; // ptr where first sub-headers begin
-
- int sc_heap_len;
- int sc_heap_offset;
- jobject sc_heap_owner;
- uint8_t *sc_heap;
-
-} scanner_t;
-
-
-
-/******************************
- ******************************
- */
-
-int scan(JNIEnv *env, jobject obj, jobject jpacket, scanner_t *scanner, packet_state_t *packet,
- int first_id, char *buf, int buf_length, uint32_t wirelen);
-
-int scanJPacket(JNIEnv *env, jobject obj, jobject jpacket, jobject jstate, scanner_t *scanner, int first_id, char *buf,
- int buf_length, uint32_t wirelen);
-
-int scanJavaBinding(scan_t *scan);
-
-uint64_t toUlong64(JNIEnv *env, jintArray ja);
-
-jint findHeaderById(packet_state_t *packet, jint id, jint instance);
-
-const char *id2str(int id);
-
-int validate(int id, scan_t *);
-int validate_next(int id, scan_t *);
-
-/****
- * Temporarily backed out of C++ Debug class and G++ compiler
- *
-extern Debug scanner_logger;
-extern Debug protocol_logger;
-*****/
-/**
- * Checks and calculates if there is enough data in the
- * buffer to access entire header, if not the header's
- * TRUNCATE flag is set and header's length set to wire_len.
- *
- * scan->length is the input and output with theoretical header length.
- * scan->wire_len is the input with actual buffer length.
- * scan->hdr_flags output with TRUNCATED flag set.
- */
-int truncate_header(scan_t *scan);
-
-int is_accessible(scan_t *scan, int offset);
-
-
-
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_bpf.h
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_bpf.h (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/include/jnetpcap_bpf.h (nonexistent)
@@ -1,25 +0,0 @@
-/* Header for jnetpcap_utils utility methods */
-
-#ifndef _Included_jnetpcap_bpf_h
-#define _Included_jnetpcap_bpf_h
-#ifdef __cplusplus
-extern "C" {
-#define EXTERN extern "C"
-#endif
-
-#include "export.h"
-
-#include <jni.h>
-
-extern jclass bpfProgramClass;
-
-extern jfieldID bpfProgramPhysicalFID;
-
-// Prototypes
-bpf_program *getBpfProgram(JNIEnv *env, jobject obj);
-void setBpfProgramPhysical(JNIEnv *env, jobject obj, jlong value);
-
-#ifdef __cplusplus
-}
-#endif
-#endif
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING.LESSER
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING.LESSER (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING.LESSER (nonexistent)
@@ -1,165 +0,0 @@
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
- This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
- 0. Additional Definitions.
-
- As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
- "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
- An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
- A "Combined Work" is a work produced by combining or linking an
-Application with the Library. The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
- The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
- The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
- 1. Exception to Section 3 of the GNU GPL.
-
- You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
- 2. Conveying Modified Versions.
-
- If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
- a) under this License, provided that you make a good faith effort to
- ensure that, in the event an Application does not supply the
- function or data, the facility still operates, and performs
- whatever part of its purpose remains meaningful, or
-
- b) under the GNU GPL, with none of the additional permissions of
- this License applicable to that copy.
-
- 3. Object Code Incorporating Material from Library Header Files.
-
- The object code form of an Application may incorporate material from
-a header file that is part of the Library. You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
- a) Give prominent notice with each copy of the object code that the
- Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the object code with a copy of the GNU GPL and this license
- document.
-
- 4. Combined Works.
-
- You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
- a) Give prominent notice with each copy of the Combined Work that
- the Library is used in it and that the Library and its use are
- covered by this License.
-
- b) Accompany the Combined Work with a copy of the GNU GPL and this license
- document.
-
- c) For a Combined Work that displays copyright notices during
- execution, include the copyright notice for the Library among
- these notices, as well as a reference directing the user to the
- copies of the GNU GPL and this license document.
-
- d) Do one of the following:
-
- 0) Convey the Minimal Corresponding Source under the terms of this
- License, and the Corresponding Application Code in a form
- suitable for, and under terms that permit, the user to
- recombine or relink the Application with a modified version of
- the Linked Version to produce a modified Combined Work, in the
- manner specified by section 6 of the GNU GPL for conveying
- Corresponding Source.
-
- 1) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (a) uses at run time
- a copy of the Library already present on the user's computer
- system, and (b) will operate properly with a modified version
- of the Library that is interface-compatible with the Linked
- Version.
-
- e) Provide Installation Information, but only if you would otherwise
- be required to provide such information under section 6 of the
- GNU GPL, and only to the extent that such information is
- necessary to install and execute a modified version of the
- Combined Work produced by recombining or relinking the
- Application with a modified version of the Linked Version. (If
- you use option 4d0, the Installation Information must accompany
- the Minimal Corresponding Source and Corresponding Application
- Code. If you use option 4d1, you must provide the Installation
- Information in the manner specified by section 6 of the GNU GPL
- for conveying Corresponding Source.)
-
- 5. Combined Libraries.
-
- You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
- a) Accompany the combined library with a copy of the same work based
- on the Library, uncombined with any other library facilities,
- conveyed under the terms of this License.
-
- b) Give prominent notice with the combined library that part of it
- is a work based on the Library, and explaining where to find the
- accompanying uncombined form of the same work.
-
- 6. Revised Versions of the GNU Lesser General Public License.
-
- The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
- If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
\ No newline at end of file
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/CHANGE_LOG.txt
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/CHANGE_LOG.txt (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/CHANGE_LOG.txt (nonexistent)
@@ -1,436 +0,0 @@
-################################################################################
-#
-# Copyright (C) 2007-2010 Sly Technologies, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-################################################################################
-
- jNetPcap Package
- Change Log
-
-== Release 1.3.b4 (2010-12-15) ==
-
-* Fixes
-
- - Memory swings - Object finalization is replaced with java Reference
- cleanup. Memory is now managed through Reference and
- ReferenceQueue mechanism.
-
-
- - Various performance optimizations in JMemory and JBuffer class. Optimized
- memory allocation path in JMemoryPool for certain object
- types.
-
- - Fixed boundary check in Checksum calculation with truncated jumbo
- Ethernet frames.
-
- - Fixed an issue when an JMemory based object tried to peer to itself.
-
- - Fixed JMemory resize issue.
-
- - Fixed Bug#3108615 - Ethernet FCS - FCS calculation and various Ethernet
- header APIs that check for presence of FCS field, allow
- verification, calculation and setting of new FCS value.
-
-
-* Added
-
- - Added a new management class named DisposableGC which runs in
- a background system thread and schedules native memory
- cleanup.
-
- - Added several system properties (nio.mx, nio.ms, nio.blocksize) which
- affect native memory allocation, limits and DisposableGC
- behavior.
-
- - PcapPacket.peerAndScan - convenience method peering header and buffer
- to a PcapPacket object. Implements certain optimizations
- to perform the task faster.
-
-
-* Changes
-
- - Changed the format of the debug output for
- PcapPacket.State.toDebugString() method. The output produced
- is more tabular with a table heading on top.
-
- - Removed no longer used classes and directories from source such as
- tests/beta1.5, JReference class, JMemory.references field
-
-* Non-code changes
-
- - Added complete MANIFEST to jnetpcap.jar file, which describes version
- information of the jNetPcap library being used.
-
- - Changed the native and java library files names to not include full
- version information. The versioning is now fully accomplished
- through the use of jnetpcap root distribution directory
- instead. This allows easier switching between different
- versions of jNetPcap.
-
- - Updated file headers which reflects the proper copyright and license
- agreement (LGPL v3)
-
- - Updated all javadoc comments and tags for all classes
-
-== Release 1.3.b3 (2010-10-01) ==
-
-* Fixes
-
- - Bug#3078703 - JMemory.transferTo(ByteBuffer) (array version)
-
- - Bug#3078704 - Debug message coming from Tcp header when options are parsed
-
-* Removed
-
- - org.jnetpcap.package.dissect - left over and unusable package intended for
- the native dissector feature which has been removed from 1.3
- release
-
- - SipHandler interface - left over from analyzer feature that has been
- removed from 1.3 release
-
-* Modifications/Updates
-
- - org.jnetpcap.protocol.voip - updated javadocs, cleaned up warnings on all
- the classes in this package
-
-== Release 1.3.b2 (2010-09-26) ==
-
-* Fixes
-
- - Bug#3062026 - Scanner.reloadAll() in JPacket.scan()
-
- - Bug#3062029 - Memory leak in native scanner reloadAll() tables
-
- - Bug#3062031 - @Bind method with multiple same headers, gets wrong header
-
- - Bug#3062035 - AnnotatedMethod doesn't open up method access perm
-
- - Bug#3062037 - Checksum.pseudoUDP coredumps on invalid headers
-
- - Bug#3062050 - Main scanner loop processes 0 length headers
-
- - Bug#3062053 - @Deprecated JPacket.getScanner method
-
- - Bug#3065968 - Missing sendPacket(JBuffer) implementation
-
- - Bug#3066662 - UDP header missing setter methods
-
- - Bug#3066959 - VLAN definition incorrectly assumes 802.1d as next header
-
- - Bug#2353774 - Tcp header incomplete - missing tcp options
-
- - Bug#3067088 - Ip4.Timestamp incorrectly initialized
-
- - Bug#3067096 - JPacket.toString() exceptions consume all output in progress
-
- - Bug#2933449 - SIP PRACK Message dosn't recognized
-
- - Bug#3018072 - Wrong scanning Sdp headers in Linux
-
-
-== Release 1.3 final (2010-08-24) ==
-
-* No code changes (b1 code thoroughly tested and deployed for several months)
-
-* Various build script changes
-
- - Added x86_64 builds
-
-== Release 1.3.b1 (2010-04-05) ==
-
-* Fixes
-
- - Bug#2981951 - Intermittent crashes in scanner
-
- - Bug#2978441 - JRegistry.addBinding(JBinding) not working
-
- - Bug#2890736 - reopened bug ConcurrentModificationException in JMemoryPool
-
- - Bug#2906021 - Ethernet trailer end up in last header payload
-
- - Bug#2908252 - JFormatter invalid state after exception during format output
-
- - Bug#2908513 - exception thrown by Checksum for truncated or recursive ICMP
- headers.
-
-* Added
-
- - Added testcase for Bug#2899902 ( buffer underflow on 64-bit systems)
-
-== Release 1.3.a1 (2009-11-06) ==
-
-* Fixes
-
- - Bug#2890773 - PcapPacketHandler invalid PcapHeader peer
-
- - Bug#2890736 - JMemoryPool concurrent mod exception
-
- - Bug#2890094 - JPacket.toHexdump doesn't work on unintialized packets
-
- - Bug#2878768 - JMemoryPacket(int) constructor doesn't work
-
- - Bug#2857282 - Ip4.destination(byte[]) setter uses incorrect offset
-
- - Bug#2897714 - invalid (char *) to (int) conversion in packet_protocol.cpp
-
-* Added
-
- - Feature#2848659 - Add frame counter reset on JScanner
-
-== No Official 1.2 stable release ==
-
-* Notes
-
- - Release 1.2 branch was deprecated and replaced with stable 1.3 branch
-
-== Release 1.2.rc5 (2009-3-18) ==
-
-* Fixes
-
- - #2688877 - reported that debian package is missing .so soft link to .so.rc4
- main lib file. Will add that link in post-install to debian
- package control file
-
- - #2648427 - PcapDumper.dump() core-dumps. A patch is available upon request.
-
- - #2557009 - LLC header problem
-
-* Added
-
- - Pcap.loop() and Pcap.dispatch() variation to allow the user to supply
- JScanner. This allows JScanner internal buffer size to be changed by the
- user
-
- - Added JPacket.setMemoryPool(). This allows the user to change the default
- allocation block size of JMemoryPool for packets that are copied via the
- constructor and transferTo() methods
-
- - Added analyzer support for Tcp/Ip family of protocols. This includes Ip
- fragment reassembly, tcp segment sequencing and reassembly as well
-
- - Added Http and Html as CORE jnetpcap protocols supported by native scanner
-
-* Changed
-
- - Moved org.jnetpcap.packet.header package to new org.jnetpcap.protocol
- package. Protocols are grouped into families of protocols, which are stored
- under appropriate protocol suite sub-packages.
-
-
-== Release 1.2.rc4 (2009-1-4) ==
-
-* Fixes
-
- - #2469209 - Ip6 CORE protocol missing scanner
-
- - #2469205 - Unchecked exceptions consumed in dispatch handlers
-
- - #2469198 - PcapPacket.transferStateAndDataFrom(PcapPacket) not working
-
-* Added
-
- - JConfig class for managing configuration through properties
-
- - Activated java's logging system for logging messages
-
- - Address resolvers - resolve addresses and numbers to human labels such as
- ip addresses to hostnames
-
-* Changes
-
- - Renamed annotation interface @FieldRuntime to @Dynamic
-
-* TODO
-
- - Mapped fields for protocols such as Http and SIP
-
-
-== Release 1.2.rc3 (2008-12-22) ==
-
-* Update to 1.2.rc2
-
-* Fixes
-
- - #2458371 - Serious memory leak in JMemory
-
- - #2458376 - Invalid class name for an exception being thrown from JNI code
-
-* Added
-
- - Protocol to protocol binding and registration
-
- - Protocol header annotations; makes protocol definitions much cleaner and
- easier to write
-
- - Protocols/java directory with some - new non core protocols being released;
- Http and Html headers are included
-
- - Added several static methods to JMemory class which report on native memory
- usage for jNetPcap library; since native memory is not reported in any JRE
- statictics, the user can rely on these JMemory methods for monitoring
- native memory usage
-
- - Added several getter methods to JBuffer class that retrieve UTF8 strings in
- raw buffers
-
-* Changes
-
- - Main JNI scanner LOOP has been slightly rewritten to take advantage of
- JHeaderScanner java objects, their bidnings and user written scanners
-
-* TODO
-
- - JField class still needs more cleanup; JFieldRuntime needs to be removed
- completely
-
- - Formatting styles for field values need to be redone; currently too limited
- in functionality
-
- - Add exception hooks; exception hooks rewrite exceptions being thrown to
- include a lot more debug information that is useful when debugging a
- protocol
-
-== Release 1.2.rc2 (2008-12-06) ==
-
-* Update to 1.2.rc1 released on 2008-11-24
-
-* Fixed
-
- - Fixed PcapPacket and JPacket class APIs
-
- - Fixed various memory related issues found with JMemory
-
-* Added
-
- - Added sub-header capabilities to JHeader and formatters
-
- - Added all Ip options to Ip4 header definition
-
- - Added all missing ICMP sub-header types
-
-* Known Issues
-
- - TCP header definition is missing its optional sub-headers
-
- - Java binding overrides are implemented but still not fully tested
-
- - Numerous javadoc typos and blank type comments
-
-== Release 1.2 (2008-11-24) ==
-
-* Feature release
-
-* Added
-
- - #2292402 - Packet decoding framework
-
- - #2292455 - Memory management
-
- - #2292464 - Add a function to acquire network interface MAC address
-
- - #2292515 - Simplify capturing packets in multi-threaded environment
-
- - #2321006 - Deprecate: PcapHandler
-
- - #2321014 - Deprecate: PcapPktHdr
-
- - #2321017 - Deprecate: PcapInteger
-
- - #2321024 - Deprecate: certain loop, dispatch functions
-
-* Bugs
-
- - #2219738 - WinPcap.sendQueue ignores its parameter.
- WinPcapSendQueue(int size) constructor was ignoring size
- parameter and using a constant.
-
- - #2219729 - Memory leak in Pcap.loop().
- Memory leak in Pcap.loop method. Local JNI references were
- accumulating causing out of memory errors in Pcap.loop when it
- was set to loop forever.
-
-== Release 1.1 (2008-06-19) ==
-
-* Maintenance release
-
-* Provides packages for: Fedora Core 8 (Linux), Debian 4 (Linux), Win32 (WinXP/Vista)
-
-* NO BUG FIXES - no bugs reported from the time of previous release
-
-== Release 1.0 (2007-12-21) ==
-
-* First production release
-
-* Bug #1855589 - Win32 isInjectSupported returned incorrect value
-
-== Release 1.0b4 (2007-08-21) ==
-
-* Linux support
-
-* Bug #1776380 - PcapBpfProgram exceptions on linux platform
-
-* Added
-
- - Pcap.inject, Pcap.isSendPacketSupported, Pcap.isInjectPacketSupported,
- Pcap.lookupDev, Pcap.lookupNet
-
-== Release 1.0b3 ==
-
-* No bugs found or reported since previous release
-
-* Additions to org.jnetpcap package
-
- - All core 'libpcap' functions
-
- - PcapClosedException, PcapExtensionNotAvailableException exceptions
-
-* Addtions of and to jnetpcap.org.winpcap package - WinPcap extensions
-
- + Nearly all WinPcap based functions, very few exceptions
-
-* Removed "commons-logging" dependency. Static initializers throw appropriate
- exceptions directly during initialization failure.
-
-== Release 1.0b2 ==
-
-* Bug #1767744 - PcapHandler object ptr error in loop() and dispatch()
- This is a critical bug, where PcapHandler objects clobers the
- parent Pcap object data after invocation through loop() or
- dispatch() method.
-
-* Add a number of int constants to Pcap.java class to represent various return
- codes, flags, and mode settings. Each constant has detailed explanation of
- its usage and where it is be applicable.
-
-* openLive() method will now also return "warning" messages in errbuf, even if
- result code from the OK was 0, meaning no error had occured, as per pcap
- specification.
-
-* Possible issue uncovered, but not fixed in this release.
-
- - setting the snaplen value on openLinve() call does not seem to cause a
- return of a truncated packet buffer from next(), nextEx(), dispatch() or
- loop(). The buffer always contains the entire packet. Significant
- debugging effort does not point to a bug in jNetPcap software but in
- underlying WinPcap library. This could be in issue with particular Network
- Interface Card in use. The issue is still under investigation, but the fix
- to critical bug #1767744 can not be delayed.
-
-== Release 1.0b1 ==
-
-* Initial release
/AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/CHANGE_LOG.txt
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-text/plain
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/RELEASE_NOTES.txt
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/RELEASE_NOTES.txt (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/RELEASE_NOTES.txt (nonexistent)
@@ -1,260 +0,0 @@
-################################################################################
-#
-# Copyright (C) 2007-2010 Sly Technologies, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-################################################################################
-
-
- jNetPcap Package
- Version 1.3.b4
- Release Notes
- Created on 2010-12-15
-
-INTRODUCTION:
-============
-
-This is a stable release beta #4 of jNetPcap library. The feature set for
-1.3 release cycle is frozen and only bug fixes will be released in future
-1.3 updates.
-
-Beta 4 addresses a significant memory utilization issue. Beta 4 replaced
-Object finalization memory cleanup model, with java Reference and ReferenceQueue
-managed objects. No classes in jNetPcap library rely on Object.finalize() to
-perform any type of cleanup. Any class requiring cleanup, now uses the
-java.lang.reference package mechanism to be notified when cleanup needs to
-occur. This is Sun/Oracle recommended way of performing cleanup.
-
-Beta 4 adds a background system thread which schedules cleanup of resources. The
-cleanup thread, named after the class implementing most of the functionality,
-DisposableGC class, works in conjunction with memory allocation mechanism to
-ensure that memory is kept within default limits of 64mb.
-
-Several system properties were added to control the behavior and limits of
-DisposableGC. Properties 'nio.mx', 'nio.ms', 'nio.blocksize' control native
-memory allocation. These properties can be defined on the command line
-as '-Dnio.mx=64mb', '-Dnio.ms=64mb', '-Dnio.blocksize=32kb'. Property 'nio.mx'
-defines an absolute limit on the amount of native memory that can be allocated.
-When the limit is reached, and memory cleanup is unable to free sufficient
-amount of memory to fulfill the original request, an OutOfMemory exception is
-thrown. Property 'nio.ms' defines a soft limit, where forcible memory cleanup
-is attempted, while memory requests continue to be honored. Property
-'nio.blocksize' defines the minimum size for the smallest memory allocation
-request. Memory is allocated in larger 'nio.blocksize' blocks and sub-allocated
-per each allocation request. This prevents excessive system memory fragmentation,
-improves overall performance (since most subsequent allocation requests are
-fulfilled in java).
-
-The default values for all 3 properties are: nio.mx=64mb, nio.ms=64mb,
-nio.blocksize=32kb. The defaults are applied to all platforms and hardware
-architectures (32-bit and 64-bit).
-
-Beta 4 also improves some critical areas of jNetPcap API. Specifically, peering,
-memory allocation and use of accessor methods in JBuffer class, are
-significantly improved.
-
-The API classes are compiled with Java 1.5.X compiler and require Java 1.5
-compatibility. The package is platform dependent as there is a native library
-components supplied for each supported operating system
-(i.e. jnetpcap.dll file for win32 systems.)
-
-This release provides the API for a complete list of Libpcap's operations which
-are to openLive, openOffline, openDead, compile filters, set them and many
-others. For capturing packets, both packet at a time and dispatched handler
-methods are implemented. Also various low level kernel buffer operations that
-are natively available through WinPcap extension library are implemented as
-well, but only available on windows based platforms.
-
-The javadoc API documentation and a user guide is available at the project's
-website at: http://jnetpcap.org.
-
-== Installation Instructions ==
-
-To install the library unzip the binary platform-dependent package into any
-directory, or install the RPM package on unix based systems into its default
-directories. There are 2 parts to setting up environment for jNetPcap.
-
- *) Win32 Dependency: jNetPcap requires WinPcap 3.1 or greater installed.
- WinPcap version 4.0.1 or greater is recommended, but not
- neccessary. (http://winpcap.org)
-
- *) FC notes: main files of interest from linux RPM package are installed
- in the following locations:
-
- - /usr/lib/libjnetpcap.so
- - /usr/share/java/jnetpcap-1.3.a1.jar
- - /usr/share/doc/jnetpcap-1.3.a1 = contains RELEASE notes and javadocs
-
- *) Debian notes: main files of interest from linux deb package are installed
- in the following locations:
-
- - /usr/lib/libjnetpcap.so
- - /usr/share/java/jnetpcap-1.3.a1.jar
- - /usr/share/doc/jnetpcap-1.3.a1 = contains RELEASE notes and javadocs
-
- 1) Add supplied jnetpcap-version.jar file to your build system's CLASSPATH.
- The jar file is found at the root of the installation directory in zip
- files and in /usr/share/java on linux systems.
-
- 2) Setup native jnetpcap dynamically loadable library. This varies between
- operating systems.
-
- * On Win32 systems do only one of the following
-
- - copy the jnetpcap.dll library file, found at root of jnetpcap's
- installation directory to one of the window's system folders. This
- could be \windows or \windows\system32 directory.
-
- - add the jNetPcap's installation directory to system PATH variable. This
- is the same variable used access executables and scripts.
-
- - Tell Java VM at startup exactly where to find jnetpcap.dll by setting
- a java system property 'java.library.path' such as:
- c:\> java -Djava.library.path=%JNETPCAP_HOME%
-
- - You can change working directory into the root of jnetpcap's
- installation directory.
-
- * On unix based systems, use one of the following
- - add /usr/lib directory to LD_LIBRARY_PATH variable as java JRE does not
- look in this directory by default
-
- - Tell Java VM at startup exactly where to find jnetpcap.dll by setting
- a java system property 'java.library.path' such as:
- shell > java -Djava.library.path=$JNETPCAP_HOME
-
- - You can change working directory into the root of jnetpcap's
- installation directory.
-
- * For further trouble shooting information, please see the following link:
- (http://jnetpcap.wiki.sourceforge.net/Troubleshooting+native+library)
-
-== Project Website and Support ==
-
-The project is actively maintained at (http://jnetpcap.org).
-
-Also please join project's [email protected] list, to discuss
-the project or report bugs at (http://sourceforge.net/mail/?group_id=164277).
-
-== Distributed Jar Files ==
-
-The file jnetpcap-version.jar provides the java implementation of the
-public API. The jar file will not function on its own and requires that the
-supplied "native shared library" be also utilized (see below.) Without the
-library, most of the classes in this jar file will throw a java
-'UnsatisfiedLinkException'.
-
-== Distributed native shared library ==
-
-The base directory of the distributed package contains a "native shared library"
-either called 'jnetpcap.dll' on windows platforms, or 'libjnetpcap.so' on
-unix based systems. The library is required in order to utilize this
-distribution. Most of the java classes included in this package will throw
-'UnsatisfiedLinkException' without this library being loaded.
-
-An environment variable pointing to the directory where the native library
-is located needs to be setup. This is either LD_LIBRARY_PATH on unix system,
-or PATH variable on windows systems. The library resides within the jnetpcap
-installation directory using zip packages and in /usr/lib directory using RPM
-packages.
-
-Within the package zip file, jnetpcap-version-arch.zip that would be
-'jnetpcap-version-arch' directory.
-
-== Dependencies ==
-
- * On win32 systems
-
- - Install of WinPcap 3.1 or greater
-
- + This is the main program pacakge. It installs drivers and DLLs
- (http://winpcap.org)
-
- - No requirement for cgywin or mingw for runtime support, only to build.
-
-
- * To run supplied tests (optional)
-
- - jUnit any version
- (http://www.junit.org/index.htm)
-
- * To build from source (compiled binaries provided in package bundle)
-
- - ANT build tool for both Java and C++ sources
- (http://ant.apache.org)
-
- - Optinal ANT task for <CC> tag
- (http://ant-contrib.sourceforge.net/cc.html)
-
- - Win32 MinGW with GCC (doesn't require 'cgywin' or any compatibility layers)
-
- - gcc on unix
-
-Both the jnetpcap-version.jar file and native jnetpcap library have to be
-loaded in order to use this package. The jnetpcap-version.jar file needs
-to be added to CLASSPATH, while the native library to either LD_LIBRARY_PATH
-on unix system, or PATH variable on windows systems.
-
-Also if you want to run the included junit tests in the 'tests' sub directory,
-you will need to included any version of 'jUnit' in the CLASSPATH.
-
-== Operating System Notes ==
-
- * WinPcap OS support
-
- - "Starting from WinPcap 4.0beta3, support for the Windows 9x/ME family of
- operating systems has been dropped. The last builds supporting such OSes
- are WinPcap 3.1 and WinPcap 4.0beta2", source http://winpcap.org website.
-
- - Current version of jNetPcap has been tested with WinPcap versions 3.1,
- 4.0, 4.0.1, 4.1.1
-
- - jNetPcap will not work with versions prior to 3.1 including 3.0 itself.
-
- - WinPcap extension API is only available on windows based platforms. You
- must use org.jnetpcap.winpcap.WinPcap.isSupport method to check if the
- extension is available on this particular platform, even when code was
- built under windows environment. The java classes are included even
- on platforms that don't support WinPcap extensions, but those classes and
- any methods inkoved will throw a PcapExtensionNotAvailableException.
-
- * On Linux/Debian
-
- - current release of jNetPcap only provides support for all linux based
- operating platforms. The RPM package does not place any explicit
- dependencies but does require libpcap RPM package to be installed. Any
- version of 0.8 or above will do.
-
- - only org.jnetpcap package is supported on all Unix based platforms.
- WinPcap extensions are disabled for non windows based platforms. (Use
- WinPcap.isSupported() method to check for support.)
-
- * On Apple OS support
-
- - no immediate support planned, but will release support at some point.
-
-
-== General Notes ==
-
-This is a major feature release. Adds support for high level protocol analysis,
-fixes several bugs, adds Http and Html header support and moves header package
-to new protocol package.
-
-== Changes ==
-
- * See CHANGE_LOG.txt in the doc/ directory
-
-
/AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/RELEASE_NOTES.txt
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-text/plain
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/COPYING (nonexistent)
@@ -1,674 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
- The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works. By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users. We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors. You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
- To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights. Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received. You must make sure that they, too, receive
-or can get the source code. And you must show them these terms so they
-know their rights.
-
- Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
- For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software. For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
- Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so. This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software. The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable. Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products. If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
- Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary. To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- TERMS AND CONDITIONS
-
- 0. Definitions.
-
- "This License" refers to version 3 of the GNU General Public License.
-
- "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
- "The Program" refers to any copyrightable work licensed under this
-License. Each licensee is addressed as "you". "Licensees" and
-"recipients" may be individuals or organizations.
-
- To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy. The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
- A "covered work" means either the unmodified Program or a work based
-on the Program.
-
- To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy. Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
- To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies. Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
- An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License. If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
- 1. Source Code.
-
- The "source code" for a work means the preferred form of the work
-for making modifications to it. "Object code" means any non-source
-form of a work.
-
- A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
- The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form. A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
- The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities. However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work. For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
- The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
- The Corresponding Source for a work in source code form is that
-same work.
-
- 2. Basic Permissions.
-
- All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met. This License explicitly affirms your unlimited
-permission to run the unmodified Program. The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work. This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
- You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force. You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright. Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
- Conveying under any other circumstances is permitted solely under
-the conditions stated below. Sublicensing is not allowed; section 10
-makes it unnecessary.
-
- 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
- No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
- When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
- 4. Conveying Verbatim Copies.
-
- You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
- You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
- 5. Conveying Modified Source Versions.
-
- You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
- a) The work must carry prominent notices stating that you modified
- it, and giving a relevant date.
-
- b) The work must carry prominent notices stating that it is
- released under this License and any conditions added under section
- 7. This requirement modifies the requirement in section 4 to
- "keep intact all notices".
-
- c) You must license the entire work, as a whole, under this
- License to anyone who comes into possession of a copy. This
- License will therefore apply, along with any applicable section 7
- additional terms, to the whole of the work, and all its parts,
- regardless of how they are packaged. This License gives no
- permission to license the work in any other way, but it does not
- invalidate such permission if you have separately received it.
-
- d) If the work has interactive user interfaces, each must display
- Appropriate Legal Notices; however, if the Program has interactive
- interfaces that do not display Appropriate Legal Notices, your
- work need not make them do so.
-
- A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit. Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
- 6. Conveying Non-Source Forms.
-
- You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
- a) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by the
- Corresponding Source fixed on a durable physical medium
- customarily used for software interchange.
-
- b) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by a
- written offer, valid for at least three years and valid for as
- long as you offer spare parts or customer support for that product
- model, to give anyone who possesses the object code either (1) a
- copy of the Corresponding Source for all the software in the
- product that is covered by this License, on a durable physical
- medium customarily used for software interchange, for a price no
- more than your reasonable cost of physically performing this
- conveying of source, or (2) access to copy the
- Corresponding Source from a network server at no charge.
-
- c) Convey individual copies of the object code with a copy of the
- written offer to provide the Corresponding Source. This
- alternative is allowed only occasionally and noncommercially, and
- only if you received the object code with such an offer, in accord
- with subsection 6b.
-
- d) Convey the object code by offering access from a designated
- place (gratis or for a charge), and offer equivalent access to the
- Corresponding Source in the same way through the same place at no
- further charge. You need not require recipients to copy the
- Corresponding Source along with the object code. If the place to
- copy the object code is a network server, the Corresponding Source
- may be on a different server (operated by you or a third party)
- that supports equivalent copying facilities, provided you maintain
- clear directions next to the object code saying where to find the
- Corresponding Source. Regardless of what server hosts the
- Corresponding Source, you remain obligated to ensure that it is
- available for as long as needed to satisfy these requirements.
-
- e) Convey the object code using peer-to-peer transmission, provided
- you inform other peers where the object code and Corresponding
- Source of the work are being offered to the general public at no
- charge under subsection 6d.
-
- A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
- A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling. In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage. For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product. A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
- "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source. The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
- If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information. But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
- The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed. Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
- Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
- 7. Additional Terms.
-
- "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law. If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
- When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it. (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.) You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
- Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
- a) Disclaiming warranty or limiting liability differently from the
- terms of sections 15 and 16 of this License; or
-
- b) Requiring preservation of specified reasonable legal notices or
- author attributions in that material or in the Appropriate Legal
- Notices displayed by works containing it; or
-
- c) Prohibiting misrepresentation of the origin of that material, or
- requiring that modified versions of such material be marked in
- reasonable ways as different from the original version; or
-
- d) Limiting the use for publicity purposes of names of licensors or
- authors of the material; or
-
- e) Declining to grant rights under trademark law for use of some
- trade names, trademarks, or service marks; or
-
- f) Requiring indemnification of licensors and authors of that
- material by anyone who conveys the material (or modified versions of
- it) with contractual assumptions of liability to the recipient, for
- any liability that these contractual assumptions directly impose on
- those licensors and authors.
-
- All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10. If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term. If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
- If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
- Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
- 8. Termination.
-
- You may not propagate or modify a covered work except as expressly
-provided under this License. Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
- However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
- Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
- 9. Acceptance Not Required for Having Copies.
-
- You are not required to accept this License in order to receive or
-run a copy of the Program. Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance. However,
-nothing other than this License grants you permission to propagate or
-modify any covered work. These actions infringe copyright if you do
-not accept this License. Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
- 10. Automatic Licensing of Downstream Recipients.
-
- Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License. You are not responsible
-for enforcing compliance by third parties with this License.
-
- An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations. If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
- You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License. For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
- 11. Patents.
-
- A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based. The
-work thus licensed is called the contributor's "contributor version".
-
- A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version. For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
- Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
- In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement). To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
- If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients. "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
- If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
- A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License. You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
- Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
- 12. No Surrender of Others' Freedom.
-
- If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all. For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
- 13. Use with the GNU Affero General Public License.
-
- Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work. The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
- 14. Revised Versions of this License.
-
- The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation. If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
- If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
- Later license versions may give you additional or different
-permissions. However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
- 15. Disclaimer of Warranty.
-
- THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. Limitation of Liability.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
- 17. Interpretation of Sections 15 and 16.
-
- If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
- If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
- <program> Copyright (C) <year> <name of author>
- This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
- You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
- The GNU General Public License does not permit incorporating your program
-into proprietary programs. If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License. But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
\ No newline at end of file
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.dll
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.dll
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.dll (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.dll (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.dll
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap-pcap100.dll
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap-pcap100.dll
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap-pcap100.dll (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap-pcap100.dll (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/jnetpcap-1.4.r1425/jnetpcap-pcap100.dll
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/exificient.jar
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: AdapterFramework/tt3plugins/EtsiItsAdapter/exificient.jar
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter/exificient.jar (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter/exificient.jar (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter/exificient.jar
Property changes:
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: AdapterFramework/tt3plugins/EtsiItsAdapter
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsAdapter (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsAdapter (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsAdapter
Property changes:
Deleted: svn:ignore
## -1,2 +0,0 ##
-EtsiItsAdapter.jar
-Preserve
Index: AdapterFramework/tt3plugins/EtsiCommonCodec/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommonCodec/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommonCodec/TT3plugin.xml (nonexistent)
@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.codec" name="ETSI Common Codec" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiCommonCodec.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- <reference id="org.etsi.common"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiCommonCodec
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommonCodec (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommonCodec (nonexistent)
/AdapterFramework/tt3plugins/EtsiCommonCodec
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiCommonCodec.jar
Index: AdapterFramework/tt3plugins/EtsiCommonAdapter/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommonAdapter/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommonAdapter/TT3plugin.xml (nonexistent)
@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.adapter" name="ETSI Common Adapter" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiCommonAdapter.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- <reference id="org.etsi.its.uppertester"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiCommonAdapter
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommonAdapter (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommonAdapter (nonexistent)
/AdapterFramework/tt3plugins/EtsiCommonAdapter
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiCommonAdapter.jar
Index: AdapterFramework/tt3plugins/EtsiItsExternalFunctions/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsExternalFunctions/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsExternalFunctions/TT3plugin.xml (nonexistent)
@@ -1,9 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.its.ttcn.ItsExternalFunctionsProvider" name="ETSI Its External functions" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiItsExternalFunctions
===================================================================
--- AdapterFramework/tt3plugins/EtsiItsExternalFunctions (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiItsExternalFunctions (nonexistent)
/AdapterFramework/tt3plugins/EtsiItsExternalFunctions
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiItsExternalFunctions.jar
Index: AdapterFramework/tt3plugins/EtsiCommon/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommon/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommon/TT3plugin.xml (nonexistent)
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.common" name="ETSI Common" provider-name="ETSI" version="1.0.0.0">
- <runtime>
- <library name="EtsiCommon.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/EtsiCommon
===================================================================
--- AdapterFramework/tt3plugins/EtsiCommon (revision 2747)
+++ AdapterFramework/tt3plugins/EtsiCommon (nonexistent)
/AdapterFramework/tt3plugins/EtsiCommon
Property changes:
Deleted: svn:ignore
## -1 +0,0 ##
-EtsiCommon.jar
Index: AdapterFramework/tt3plugins/MainCodec/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/MainCodec/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/MainCodec/TT3plugin.xml (nonexistent)
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plugin PUBLIC "-//TESTING TECH//DTD TT3plugin//2.0" "TT3plugin.dtd">
-<plugin id="org.etsi.ttcn.codec.MainCodec" name="Main Codec" provider-name="STF462" version="1.0.0.0">
- <runtime>
- <library name="MainCodec.jar"/>
- <library name="../../build"/>
- </runtime>
- <dependency>
- <reference id="com.testingtech.ttworkbench.sa"/>
- </dependency>
-</plugin>
Index: AdapterFramework/tt3plugins/TT_TestSystem/TT3plugin.xml
===================================================================
--- AdapterFramework/tt3plugins/TT_TestSystem/TT3plugin.xml (revision 2747)
+++ AdapterFramework/tt3plugins/TT_TestSystem/TT3plugin.xml (revision 2748)
@@ -4,7 +4,11 @@
<runtime>
<library name="../../build"/>
<library name="../../plugins/Tool_ttwb.jar" />
+ <library name="../../plugins/ExternalFunctions.jar"/>
<library name="../../plugins/EtsiCommonFramework.jar"/>
+ <library name="../../plugins/EtsiCodecFramework.jar"/>
+ <library name="../../plugins/EtsiAdapterFramework.jar"/>
+ <library name="../../plugins/EtsiHelpers.jar"/>
</runtime>
<dependency>
<reference id="org.etsi.its.codec.tool.testingtech.LibItsCam_asn1"/>
@@ -17,16 +21,16 @@
<extension point="com.testingtech.ttcn.extension.CodecProvider">
<parameter id="name" value="Codec Framework"/>
<parameter id="description" value="Codec Framework"/>
- <parameter id="class" value="org.etsi.its.tool.testingtech.Its_CodecProvider"/>
+ <parameter id="class" value="org.etsi.ttcn.tool.spirent.codec.Its_CodecProvider"/>
</extension>
<extension point="com.testingtech.ttcn.tri.extension.PortPluginProvider">
<parameter id="name" value="System Adapter Framework"/>
<parameter id="description" value="System Adapter Framework"/>
- <parameter id="class" value="org.etsi.its.tool.testingtech.PluginAdapter"/>
+ <parameter id="class" value="org.etsi.ttcn.tool.spirent.adapter.PluginAdapter"/>
</extension>
<extension point="com.testingtech.ttcn.extension.ExternalFunctionsProvider">
<parameter id="name" value="ITS External Functions"/>
<parameter id="description" value="ITS External Functions."/>
- <parameter id="class" value="org.etsi.its.tool.testingtech.ExternalFunctionsPluginProvider"/>
+ <parameter id="class" value="org.etsi.ttcn.tool.spirent.xf.ExternalFunctionsPluginProvider"/>
</extension>
</plugin>