Rev

View as "text/plain" | Blame | Last modification | View Log | Download | SVN | Bug Tracker


[MODULE_PARAMETERS]
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

# The GeoNetworking address of the IUT.
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
  typeOfAddress := e_initial,
  stationType := e_unknown, #e_roadSideUnit,
  stationCountryCode := 0, #33,
  mid := '4C5E0C14D2EB'O
}

# IUT Station ID. See testdata set and plugtest1026-log-locD 002.pcap
LibItsCommon_Pixits.PX_IUT_STATION_ID := 10143;

LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB

[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).

LogFile := "../logs/%e.%h-%r.%s"
FileMask := USER | MATCHING|ACTION|DEFAULTOP|ERROR|EXECUTOR|FUNCTION|PARALLEL|PORTEVENT|STATISTICS|TESTCASE|TIMEROP|VERDICTOP|WARNING
ConsoleMask := USER | MATCHING|ACTION|DEFAULTOP|ERROR|EXECUTOR|FUNCTION|PARALLEL|PORTEVENT|STATISTICS|TESTCASE|TIMEROP|VERDICTOP|WARNING
#FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
#TimeStampFormat := DateTime

[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
#   next_header     : btpA|btpB (overwrite BTP.type)
#   header_type     : tsb|gbc
#   header_sub_type : sh (single hop)
# DENM Layer
#   next_header     : btpA|btpB (overwrite BTP.type)
#   header_type     : tsb|gbc
# BTP Layer
#   type            : btpA|btpB
#   destination port: dst_port
#   source port     : src_port
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
#   ll_address             : GeoNetworking address of the Test System
#   latitude               : Latitude of the Test System
#   longitude              : Longitude of the Test System
#   beaconing              : Set to 1 if GnLayer shall start beaconing
#   expiry                 : Beaconning timer expiry (ms)
#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU
#   secured_mode           : Set to 1 if message exchanges shall be signed
#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
#                            NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1
#   secure_db_path         : Path to the certificates and keys storage location
#   hash                   : Hash algorithm to be used when secured mode is set
#                            Authorized values are SHA-256 or SHA-384
#                            Default: SHA-256
#   signature              : Signature algorithm to be used when secured mode is set
#                            Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384
#                            Default: NISTP-256
#   cypher                 : Cyphering algorithm to be used when secured mode is set
#                            Authorized values are NISTP-256, BP-256 and BP-384
#                            Default: NISTP-256
# Ethernet layer
#   mac_src  :Source MAC address
#   mac_bc   :Broadcast address
#   eth_type : Ethernet type
# Commsignia layer
#   mac_src     : Device MAC address, used to discard packets
#                 To indicate no filering, use the value 000000000000
#   mac_bc      : Broadcast address
#   eth_type    : Ethernet type, used to discard packets
#   target_host : Device address
#   target_port : Device port
#   source_port : Test System port
#   interface_id: Interface id, used to discard packets
#   tx_power    : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)
#   dst_port: Destination port
#   src_ip  : Source IPv4 address (aa.bb.cc.dd)
#   src_port: Source port
# Pcap layer
#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System
#   filter     : Pcap filter (compliant with tcpdump syntax) 
#   Online mode:
#     nic: Local NIC
#          If set, online mode is used
#   Offline mode (nic is present but not set):
#     file        : File to read
#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset
#     time_offset : Time offset, used to skip packets with time offset < time_offset
#     save_mode   : Set to 1 to save sent packet, 0 otherwise
#

# Non secured IUT (LAN USB)
system.camPort.params := "
    CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/
    BTP(type=btpB,dst_port=2001,src_port=0,device_mode=1)/
    GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1)/
    ETH(mac_src=803f5d092bdc)/
    PCAP_FILE(file=../testdata/test_9950_cam.pcap,realtime=yes)"

# Non secured IUT-WIFI
#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,device_mode=1)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1)/ETH(mac_src=1002b522d4f4)/PCAP(mac_src=1002b522d4f4,nic=A9142677-63D9-4DAC-93C9-F80C75DABE66,filter=and ether proto 0x8947)"
# Secured IUT
#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,deviceMode=1)/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,deviceMode=1,secured_mode=1,certificate=CERT_IUT_F_AT,sec_db_path=/home/vagrant/tmp/test_01)/ETH(mac_src=080027D2B658,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=803F5D092BDC,nic=eth1,filter=and ether proto 0x8947)"

# CAM UpperTester port based on UDP (LAN USB)
system.utPort.params := "UT_CAM(loopback=1)"

# CAM UpperTester port based on UDP (WIFI)
#system.utPort.params := "UT_CAM(loopback=0)/UDP(dst_ip=172.28.1.208,dst_port=12345,src_ip=172.28.0.123,src_port=12345)/ETH(mac_src=1002b522d4f4,mac_dst=08002794290a,eth_type=0800)/PCAP(mac_src=1002b522d4f4,nic=A9142677-63D9-4DAC-93C9-F80C75DABE66,filter=and udp port 12345)"

[EXECUTE]
ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01
ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02

[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
KillTimer := 10.0
LocalAddress := 127.0.0.1
TCPPort := 12000
NumHCs := 1